Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Vision Builder Custom Step Does Not Show Up in VBAI 3.6 I received a custom step that has been produced for distribution, but I do not see it listed in Vision Builder AI 3.6. What can I do to use the custom step? URL: http://digital.ni.com/public.nsf/allkb/913E53271D287F12862575A200514673

¿Por qué Obtengo un Error: 'Match Color Pattern 1 Could Not Be Initialized' en Vision Builder for Automated Inspection? Estoy trabajando con Vision Builder for Automated Inspection (VBAI) 3.5 y un Compact Vision System (CVS) 145X como mi dispositivo remoto. En mi inspección tengo un paso Match Color Pattern aplicado a una imagen previamente adquirida. Si corro el estado de manera local se realiza correctamente, pero URL: http://digital.ni.com/public.nsf/allkb/63DD871825A34C41862575CF0072F975

Does Vision Assistant 8.6 Support Image Acquisition from My Smart Camera? I notice when I add the Acquire Image (Smart Camera) step to Vision Assistant 8.6 I cannot connect to my Smart Camera. I have tried to select the camera by choosing Select Network Target... from the Target drop-down menu and I get the following error:If I try to manually add the Smart Camera by URL: http://digital.ni.com/public.nsf/allkb/48EC22583C6F751486257516006E471C

Vision Assistant 8.6是否支持从智能相机(Smart Camera)上采集图像？ 当我在Vision Assistant 8.6中添加Acquire Image (Smart Camera)步骤时，不能连接到Smart Camera。我尝试从Target下拉菜单中Select Network Target...中选择相机，但是会返回下列错误：如果手动通过Add Target 按钮添加Smart Camera并输入正确的IP地址，会返回下列错误:Vision Assistant是否支持从Smart Camera采集图像? URL: http://digital.ni.com/public.nsf/allkb/20F3DAD7401E551986257552000ECA26

DataSocket I/O Step Removed from VBAI 3.6 Why is the DataSocket I/O step missing from Vision Builder for Automated Inspection (VBAI) 3.6? URL: http://digital.ni.com/public.nsf/allkb/3076CC34F469478E86257513006F2D90

Does Vision Builder for Automated Inspection (VBAI) Support Modbus Communication? I have created an inspection in Vision Builder for Automated Inspection (VBAI) and have several modbus devices I would like to communicate with from my inspection. Does VBAI support modbus communication? URL: http://digital.ni.com/public.nsf/allkb/8D3FC52034B4AF2E862574F900035ABD

Vision Builder for Automated Inspection (VBAI) 是否支持Modbus通信? 我在Vision Builder for Automated Inspection (VBAI) 中创建了一个检测序列(inspection)，在这个检测序列中我想与几个modbus设备通信。VBAI是否支持modbus通信功能？ URL: http://digital.ni.com/public.nsf/allkb/AEADBDDB249ABC5C862574FE0005C4AB

在紧凑视觉系统(CVS)中使用Vision Builder for Automated Inspection (VBAI) 中的Run LabVIEW VI步骤 我尝试在紧凑视觉系统(CVS)中使用Vision Builder for Automated Inspection (VBAI) 中的Run LabVIEW VI步骤。当我运行检测序列(inspection)时，Run LabVIEW VI步骤并不能正确执行，感觉并没有包括主VI中的subVI和函数。 URL: http://digital.ni.com/public.nsf/allkb/E178D80AE18FD296862574FE00059839

Loading Vision Builder for AI 3.5 or Later through MAX onto a Compact Vision System (CVS) or Smart Camera I have a Compact Vision System (CVS) or NI 17xx Smart Camera onto which I am trying to install Vision Builder for Automated Inspection (VBAI) 3.5 or later. However, when I locate the device as a remote system in Measurement & Automation Explorer (MAX) and choose to add or remove software on it, no URL: http://digital.ni.com/public.nsf/allkb/7181F26387581E5A8625749D005AD921

Lighting Options Do Not Show for Smart Camera When configuring a light for my Smart Camera in Measurement & Automation Explorer or Vision Builder AI, why are there no options available under the Select Light section? URL: http://digital.ni.com/public.nsf/allkb/B8A69446FC864D468625746C00759817