Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

デスクトップPCのRTでIEEE1394のカメラは使用できますか？ デスクトップPCのRT (LabVIEW RT ETS for Desktop) でIIDC準拠のIEEE1394のカメラを使用したいのですが、問題なく使用できますか？ URL: http://digital.ni.com/public.nsf/allkb/46AB2EE52D68AE4A86257421002C896A

Error -63001 NI-RIO FPGA Communications Occurs With DMA Transfers From Host to FPGA I am trying to do a DMA transfer from the 900x cRIO RT controller to the cRIO FPGA. The FPGA code compiles. However, when I run the code I get a Real-Time error saying the following: Error -63001: NI-RIO FPGA Communications.Framework: (Hex URL: http://digital.ni.com/public.nsf/allkb/257AF49E2110630F8625741F0062D292

What is the Correct File Path Format for LabVIEW Real-Time Targets? I am trying to save a file on my real-time target and need to know what directory to specify for saving the file. What directory do I save the file on to make sure it is saved on the real-time target? URL: http://digital.ni.com/public.nsf/allkb/BBCAD1AB08F1B6BB8625741F0082C2AF

How do I install Reliance on my RT PC or PXI Target? Reliance is a file system developed specifically for embedded systems. It is used in real-time systems where there cannot be a chance that data could be lost due to file system corruption. In order for Reliance to be used, support for Reliance must be offered by the Real-Time Operating URL: http://digital.ni.com/public.nsf/allkb/8289ED02D027784A86257413005B5F69

Input or Output Bundlers Move out of Viewing Area using Statechart Module When using LabVIEW Statechart module, and configuring a state or transition, the input or output clusters are moved out of the viewing area (as seen below). Why does this happen? URL: http://digital.ni.com/public.nsf/allkb/6494E3A1C2132C4E8625741200770966

Can I Install Software On My FieldPoint Controller Without Having LabVIEW Real-Time? I have reformatted the internal CompactFlash memory on my [c]FP controller. When I go to Add/Remove Software, I see one of the following: 1. I do not see LabVIEW Real-Time in the list of software to install. 2. I see a message stating "LabVIEW Real-Time URL: http://digital.ni.com/public.nsf/allkb/CE57D76B598AEA878625740C00671AF8

Error -34107 when running a LabVIEW Executable that access a FieldPoint Network Module I have an executable, built in LabVIEW 7.x, that accesses a FieldPoint Network module, but I am receiving the following error:Error -34107 occurred at an unidentified locationPossible reason(s):FieldPoint: Unable URL: http://digital.ni.com/public.nsf/allkb/FD946478C1E868208625740C0050FA70

如何将LabVIEW 8.0 RT模块安装至C盘以外的硬盘分区 默认情况下，您无法选择LabVIEW 8.0 RT模块的安装路径或分区。我有一个经过分区的硬盘，并且我希望将RT安装在C盘以外的其他分区；安装助手会提示驱动器没有足够的内存，如何才能指定RT的安装分区呢？ URL: http://digital.ni.com/public.nsf/allkb/50E22F8785884EF248257401001EF4C2

MAX Crashes after Rebooting a RT PXI-8104 with Several Devices that Support TEDS Measurement and Automation Explorer (MAX) crashes when rebooting a connected Real-Time (RT) controller that has TEDs devices installed. URL: http://digital.ni.com/public.nsf/allkb/97BAAADF2481903B862573F300786DD0

在运行FPGA VI时会收到一条“Invalid Bitfile”的错误消息 在试图运行FPGA VI时，收到一条"Invalid Bitfile"的错误消息，而这个VI是刚刚被编译过的。为什么这个位流文件是无效的？ URL: http://digital.ni.com/public.nsf/allkb/CE5D1BAFB3CEF3C88625742B0005D766