Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

使用CompactRIO扫描模式时如何复位计数器？ 我在使用CompactRIO扫描模式特定的数字功能配置一个数字模块作为计数器或者正交编码器使用，想要编程对其进行复位，如何操作呢？ URL: http://digital.ni.com/public.nsf/allkb/910553678AB71057862574B4001FEF62

Why does my Real-Time Target Hang on Reboot After Installing NI Vision Development Module 8.6? I upgraded to version 8.6 of the NI Vision Development Module and installed it onto my Real-Time target, but the controller did not start properly after reboot. Why does my target hang? URL: http://digital.ni.com/public.nsf/allkb/E3A832C2E441CC91862574A300557EAC

Why Can’t I Add My C-Series Module Under My cRIO Chassis I am trying to add my C-Series Module to my cRIO in the LabVIEW Project. However, while I can see many C-Series Modules I can’t see mine. URL: http://digital.ni.com/public.nsf/allkb/17A947BE62F08F418625749E006196C6

Why does Measurement & Automation Explorer Report my Real-Time Target System State as 'Connected - Inconsistent IP Settings?' I installed LabVIEW Real-Time 8.6 on my target, but I can no longer FTP to the target or connect to it through LabVIEW. I noticed Measurement & Automation Explorer (MAX) identifies the System State as "Connected - Inconsistent IP Setting." What does this mean and how do I fix it? URL: http://digital.ni.com/public.nsf/allkb/A0F6EFF8A33578948625749C006DEC3B

Why does my Scan Engine Code Return an Undefined Error? I am running code on my cRIO target that includes various Scan Engine VIs. Sometimes the Scan Engine VIs return an undefined error code. What do these errors mean? URL: http://digital.ni.com/public.nsf/allkb/EEDAD96BE205D9BD8625749C0052A03D

VxWorks 컨트롤러에서 string-to-path 를 사용하면 Error 1430 발생 VxWorks 컨트롤러에서 file I/O를 실행하려고 하면, Error 1430: "The path is empty or relative. You must use an absolute path."에러가 발생합니다. 어떻게 해결할까요? URL: http://digital.ni.com/public.nsf/allkb/1FF4245CEB8493E6862574AB0020BA77

Why do I get Error 1430 when using string-to-path on my VxWorks controller? When I try to perform file I/O on my VxWorks controller, I get Error 1430: "The path is empty or relative. You must use an absolute path." How can I resolve this? URL: http://digital.ni.com/public.nsf/allkb/0D6D5696E481E4808625749800497EA1

Why Does My VI Return a Slightly Different Value When I Run it on a Different Operating System? I have a VI that returns one value on a Real-Time target, but when I run the same VI on a Desktop PC, I get a slightly different value. What is the difference? URL: http://digital.ni.com/public.nsf/allkb/D97D6D082AF288B28625748D004F9FBF

Why does the Real-Time Execution Trace Toolkit Hang on Launch? I installed the Real-Time Execution Trace Toolkit, but when I open the program it hangs. Why can't I run the Trace Toolkit? URL: http://digital.ni.com/public.nsf/allkb/528BB63EE26907E086257487006D8828

Create a Real-Time Desktop PC from the Desktop PC Format Hard Drive Disk How do I set up software on my new Real-Time PC if I can't use the USB key utility disk? URL: http://digital.ni.com/public.nsf/allkb/6F13EAA1C5B57F5486257483007D370D