Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Why Do I Get an Error in MAX After Downgrading From LabVIEW Real-Time 8.6 to 8.5? After downgrading from LabVIEW Real-Time 8.6 and Network Variable Engine 1.5.0 to LabVIEW Real-Time 8.5 and Network Variable Engine 1.4.0, I get one of the following messages in Measurement & Automation Explorer (MAX) when I try to expand Remote Systems >> URL: http://digital.ni.com/public.nsf/allkb/679050D7A24AAF448625746D004FE902

FTPを使用してRTシステムとWindowsホストPC間でデータを転送する方法 PXIのRTシステムでデータ集録を行い、ファイルに保存しています。集録データのファイルをWindowsのホストPCに転送したいと思いますが、どのようにしたらよいですか？また、転送を自動的に行うようにするにはどのようにしたらよいですか？ URL: http://digital.ni.com/public.nsf/allkb/61FE789A2BE86D6D86257467000EDEFA

LabVIEW Real-Time Execution Trace Toolkit 2.0.1 Readme I have not installed the Real-Time Execution Trace Toolkit. Can I still access the readme files? URL: http://digital.ni.com/public.nsf/allkb/2FEF071418A921718625745D0080CEB4

LabVIEW Real-Time Module 8.6 Readme I do not have the LabVIEW Real-Time Module 8.6 installed. Can I still access the readme file? URL: http://digital.ni.com/public.nsf/allkb/7FC16012C1DCAB348625745D007E9549

Why are my recommended software sets broken after I installed NI-FieldPoint 6.0.1? I upgraded to NI-FieldPoint 6.0.1 or LabVIEW 8.5.1. Now when I try to install software on my Real-Time FieldPoint controller, my recommended software sets for LabVIEW 8.5 are greyed out. How do I fix this? URL: http://digital.ni.com/public.nsf/allkb/2349FC51930C96A28625745D00703C1C

What Operating System is my Real-Time Controller Running and Why? What operating system is my real-time controller running, and why are there different Real-Time Operating Systems on different hardware targets? URL: http://digital.ni.com/public.nsf/allkb/D85F9139AEB88F188625745700569E8D

How Can I Test My PC For Compatibility with LabVIEW Real-Time or LabWindows/CVI Real-Time for Desktop ETS? I have purchased a desktop computer or single-board computer (SBC) for use as a LabVIEW Real-Time or LabWindows/CVI Real-Time target. I have read the requirements for chipsets and processors, but I understand there might be other details such as BIOS settings that I may need to learn about. URL: http://digital.ni.com/public.nsf/allkb/9209361E17708D548625744A007FF353

How does Real-Time Hardware Update Its System Clock? How and when does my Real-Time hardware (cFP, cRIO, or PXI) update its system clock? URL: http://digital.ni.com/public.nsf/allkb/9DCFB7C0EB06CA9786257440006182E2

Why Can't I Boot My Real-Time Controller From a USB Key? I am trying to boot my desktop PC or PXI controller from a real-time (RT) USB utility drive that I created in Measurement and Automation Explorer. I set the controller to boot from USB by changing the boot order in the BIOS, but it is still not working. Why is my controller not detecting the URL: http://digital.ni.com/public.nsf/allkb/9F71984BF5D7DCF68625742E0072797E

Why do I get a 'Missing Export' Error when Installing LabVIEW Real-Time 8.5 or 8.5.1 to my Multicore Target? When I install LabVIEW Real-Time 8.5 or 8.5.1 software from my host machine, the target shows the message below on reboot.Error loading 'ftpserve.dll': Missing export URL: http://digital.ni.com/public.nsf/allkb/9223F0CA39F995EA8625742B006FEF8D