Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

CompactRIO Controller Installation Issue: Connected - Safe Mode (Improper Installation) I have just received my compactRIO controller and after installing LabVIEW RT software, the controller boots into SafeMode with the status of Connected - Safe Mode (Improper Installation). How do I get my CompactRIO controller out of this state? URL: http://digital.ni.com/public.nsf/allkb/B2BA1B006C12B1A2862575D60044E192

Will the Format Disk Option in MAX Format All Partitions on My Dual Boot PXI Controller? I have a dual boot PXI controller and I currently have it running LabVIEW Real-Time. If I right click on the target in Measurement and Automation Explorer (MAX), will it format all partitions on my controller or just the RT partition? URL: http://digital.ni.com/public.nsf/allkb/BFF5A61E445A0E34862575C8005FBE90

Using Both Scan Mode and FPGA Mode On My cRIO Simultaneously. I want to use some of my cRIO modules in Scan Mode and some in FPGA Mode. There is no explicit option to do this in the chassis properties. How can I do this? URL: http://digital.ni.com/public.nsf/allkb/0DB7FEF37C26AF85862575C400531690

Failed to Load Shared Library NILVSim.* on a Real-Time Target Device When trying to run a VI on my real-time target I see the message: Deployment completed with errors. When I look back the error message specified is: Failed to load shared library NILVSim.*. URL: http://digital.ni.com/public.nsf/allkb/E80E056BB209CB29862575AD005BA2EF

Installing IVI Support for Real-Time Targets I have written third-party drivers to be used for my Real-Time (RT) target, but I cannot install the IVI Compliance Package under Add/Remove Software in Measurement & Automation Explorer (MAX). How do I install IVI support for my target? URL: http://digital.ni.com/public.nsf/allkb/1E36C99C8499E5F3862575AC00620674

Why is My Real-Time CPU at 100% When Reading from a DMA FIFO (FPGA)? I am reading data into my LabVIEW Real-Time program from an FGPA by using a Target to Host DMA FIFO. I can see in the Distributed System Manager that the Real-Time target's CPU usage nears 100%, which causes some starvation in processor-intensive applications. How can I resolve this issue? URL: http://digital.ni.com/public.nsf/allkb/583DDFF1829F51C1862575AA007AC792

Cannot Read UTC Time From My Real-Time Controller I have set my controller to Coordinated Universal Time (UTC) in Measurement & Automation Explorer (MAX), but my controller is still returning local time. Why is this happening? URL: http://digital.ni.com/public.nsf/allkb/77B7FA59E82EB076862575A20047BB8D

Why doesn't my VLAN IP Address work when I apply it to my Real-Time Target? I have a set of IP Addresses that are restricted into a VLAN. When I use one of the IP Address in that range as the IP Address of my Real-Time (RT) Target, I cannot ping or otherwise use the target. When I use another IP Address for this setting, everything works fine. Why is this? URL: http://digital.ni.com/public.nsf/allkb/B71E56EF8070CAF386257599004977AF

PXI-RT+PXI-785xRによるSinglePointAI-AOのベンチマーク PXI-785xRとPXIのRTコントローラを使用して、シングルポイントのAI-AOを行おうと考えています。 NIのホームページで、ベンチマーク結果 （Benchmarking Single-Point Performance on National Instruments Real-Time Hardware） を見つけましたが、使用しているハードウェアがPXI-7831RとPXI-8106RTでした。 785xRを使用した場合はどのような結果になりますか。 URL: http://digital.ni.com/public.nsf/allkb/FF5FC763F0E64174862575980036CED7

FTP Logging on Real-Time Targets I want to enable FTP logging for the FTP server on my Real-Time (RT) target. Can I do this? URL: http://digital.ni.com/public.nsf/allkb/21E7041F00B1622086257592004948CD