Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Why Does My Monitor Output PC:):) When I Boot My Real-Time Target? I have a real-time target which is connected to a monitor and when I turn it on, the only thing that appears on the screen is PC:):). Why is my target not booting correctly? URL: http://digital.ni.com/public.nsf/allkb/1888A3C64914D342862572A300665339

Configure The PXI-8106 To Operate As A Real-Time Controller I have a PXI-8106, and have selected the options in the BIOS boot into RT. It appears to enter safe mode, but I cannot seem to find it from my host machine. I’ve verified that I’m on the same subnet and other networking settings are correct. What am I doing wrong? URL: http://digital.ni.com/public.nsf/allkb/4B51244384CF3F00862572A200760B22

PXI-8106をRT（Real-Time リアルタイム）コントローラとして使用する場合の設定 PXI-8106をRTコントローラとして起動するようにBIOSを変更し、セーフモードで起動させました。 しかし、ホストPCのMAXでRTコントローラをみつけることができません。 IPアドレスが同じサブネットにあることや、そのほかのネットワークの設定にも問 URL: http://digital.ni.com/public.nsf/allkb/8E16D95598282DD0862572F200104984

設定PXI-8106為即時控制器 我有一個PXI-8106，並且在BIOS設定開機時進入RT系統。它似乎進入到了安全模式，但是我在主機上找不到它。我已經確認過此兩台電腦在相同的子網域下，並且其它網路設定都是正確的。我有那裡做錯了嗎? URL: http://digital.ni.com/public.nsf/allkb/FC50A7E0B94875538625738D0035B0C9

我该如何在MAX 中为 实时目标机配置我的 SCXI 机箱？ 我有一个连接到实时目标机的 SCXI 机箱（例如，一个带有 PXI-8186 RT 控制器的 PXI-1050 混合机箱）。我该如何在Measurement and Automation Explorer (MAX)中配置我的 SCXI 机箱和模块，以使得能在实时目标机上使用？ URL: http://digital.ni.com/public.nsf/allkb/9C241AF7A40DB1F64825726700369825

Reading the Temperature of a PXI Controller in LabVIEW I am writing an application and would like to be able to programmatically read the internal temperature of a PXI controller. I found the Developer's Zone example program in the Related Links section but cannot develop that into a stand alone application. Where can I find code that I can build URL: http://digital.ni.com/public.nsf/allkb/9993B9BE8B39F7118625724500030C78

How Do I Know if My PXI Module is Supported in LabVIEW Real-Time? I am trying to use my PXI module in LabVIEW Real-Time and either it is not showing up in Measurement & Automation Explorer (MAX) or I am having difficulties using the module. Is it possible that my PXI module is not supported with LabVIEW Real-Time? Where can I find this information? URL: http://digital.ni.com/public.nsf/allkb/E2DAD2237DA72156862572430081BD49

How Can I Make My PXI Controller a Real-time Target? I have a PXI controller that I would like to run real-time (RT) applications. I know National Instruments sells multiple PXI RT controllers, but is there any way to modify my existing controller? URL: http://digital.ni.com/public.nsf/allkb/21C45EF391059C2A86257241005CA814

如何将我的PXI控制器作为一个实时目标？ 我有一个PXI控制器，想在上面运行实时 (RT)应用程序。我了解NI提供多种PXI的实时控制器，不过我想知道有没有可能修改我现有机箱的配置使之成为一个实时目标机？ URL: http://digital.ni.com/public.nsf/allkb/2D12B2C8D883B58A8625736D001B9A2C

Why Do I Get “Kernel.446580: Illegal Win32 API Called From HW ISR” Error When I Restart My PXI Real-Time Controller With The RT Reboot Controller VI? Why do I get Kernel.446580: Illegal Win32 API called from HW ISR error when I restart my PXI Real-Time (RT) controller with the RT Reboot Controller VI? The RT controller works fine if I manually cycle the power. I can see the error message only on the monitor directly attached to the URL: http://digital.ni.com/public.nsf/allkb/3580A776605790F986257211005E013F