Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Why Does the cRIO Hangs when Resetting the Controller with System Reset? When I set the System Reset IO to TRUE on the FPGA, my cRIO hangs. Why does this happen? URL: http://digital.ni.com/public.nsf/allkb/C3B8A3D27D676FA08625744200528D94

Error -63001 NI-RIO FPGA Communications Occurs With DMA Transfers From Host to FPGA I am trying to do a DMA transfer from the 900x cRIO RT controller to the cRIO FPGA. The FPGA code compiles. However, when I run the code I get a Real-Time error saying the following: Error -63001: NI-RIO FPGA Communications.Framework: (Hex URL: http://digital.ni.com/public.nsf/allkb/257AF49E2110630F8625741F0062D292

在运行FPGA VI时会收到一条“Invalid Bitfile”的错误消息 在试图运行FPGA VI时，收到一条"Invalid Bitfile"的错误消息，而这个VI是刚刚被编译过的。为什么这个位流文件是无效的？ URL: http://digital.ni.com/public.nsf/allkb/CE5D1BAFB3CEF3C88625742B0005D766

Why Do I See Large Binary Values Coming From Coming from My Analog FPGA Reading I am seeing raw binary data that is outside of the range of my analog device. URL: http://digital.ni.com/public.nsf/allkb/7829D061AB7EF7F1862573E100702A2C

ホストからFPGAにDMA転送する時にエラー-63001が発生します。 cRIOのホスト（RT）側からcRIOのFPGA側へのデータ転送にDMA転送を行おうと考えています。そのため、LabVIEWのプロジェクトエクスプローラのFPGAターゲットでFIFOを作成し、プロパティでTypeの項目をHost to Target - DMAに設定し、FIFOを作成■> URL: http://digital.ni.com/public.nsf/allkb/148D9EDAF7A3BE3E862573850043C395

cRIOからホストPCへのデータ転送方法 cRIOのデータをホストPCに転送しようと思っています。どのように行うのが高速ですか？ URL: http://digital.ni.com/public.nsf/allkb/C02EB78B17E1EACE8625734E0005D1EC

What is a Recommended Software Set? I installed the August 2007 Driver CD and the LabVIEW Real-Time Software Wizard has changed. I now have the option to install recommended software sets. What are they, and why are some of them disabled? How do I install a set of software that includes software that is not in one of URL: http://digital.ni.com/public.nsf/allkb/A0B2AEDA76A029DC8625731B0057A16E

VxWorks Targets Do Not Honor New Daylight Savings Time Rules Recently, the rules for Daylight Savings Time start and stop have changed. My VxWorks-based controller (such as the cRIO 901x series) seems to be an hour off sometimes. How do I correct this? URL: http://digital.ni.com/public.nsf/allkb/7E5CB910B1685C8B8625731A005FCB62

LabVIEW Runtime error in MAX when accessing a cRIO-901x with LabVIEW Real-Time 8.5 from MAX 4.2.1 or earlier When attempting to expand the Software tab in MAX on a cRIO-901x I get several error message for my controllers that have LabVIEW Real-Time 8.5 installed. One of these error messages indicates an error starting the LabVIEW Runtime and says to reinstall your product and then contact National URL: http://digital.ni.com/public.nsf/allkb/1584D952E54ABB59862572F7006F3438

当我在MAX 4.2.1或更早版本上使用装有LabVIEW Real-Time 8.5的cRIO-901x时，出现LabVIEW Runtime error 在我的安装了LabVIEW Real-Time 8.5的控制器上，当我在MAX中对cRIO-901x展开Software tab时，遇到了一些错误信息。其中的一条错误信息指出了启动LabVIEW Runtime的错误，并且提示重装该产品并且联系National Instruments.当我从该控制器上安装/卸载软件时，另一条消息对话框提示该 URL: http://digital.ni.com/public.nsf/allkb/119A978A104B95DC862573570044166F