Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

我如何才能利用编程的方式重新启动我的CompactRIO控制器？ 我需要利用编程的方式重新启动我的CompactRIO控制器。这是否可能？ URL: http://digital.ni.com/public.nsf/allkb/E30AEFBF6D44A72A4825715A00215BD8

Compatibility Information of LabVIEW Real-Time with NI-RIO I am not able to use LabVIEW 7.1 and program FPGA’s using NI-RIO 2.X and higher through a real time controller. It requires an upgrade of LabVIEW. What is the problem? URL: http://digital.ni.com/public.nsf/allkb/47C7186E9F7716E98625714F007B571F

Error 1073807346: Error Occured at VISA Open and NI-RIO Open: Given Session or Object Reference is Invalid I am done writing and compiling my FPGA code and I want to run it. However, when I use the Open FPGA Reference and Invoke nodes on my host VI, when I hit the Run button, I get the following error:Error occured at VISA Open and NI-RIO open. The given session or object reference is URL: http://digital.ni.com/public.nsf/allkb/8203C68AF60F4259862571490077FFF3

Erasing FPGA Flash Memory Problem: How can I erase the contents of the flash memory on my FPGA board? Solution: If you have the NI-RIO Driver 2.1 (or later) installed on your computer, then this can be done by using the RIO Device Setup Utility. This utility can be invoked through an open LabVIEW project (8. URL: http://digital.ni.com/public.nsf/allkb/4789525480C3B78C8625714000746BFD

FPGA 플래쉬 메모리 지우기 FPGA 보드의 플래쉬 메모리의 내용을 어떻게 지울수 있습니까? URL: http://digital.ni.com/public.nsf/allkb/6C74573A17918DCF8625714600188A81

How Do I Synchronize the FPGA Clock in my R-Series Intelligent I/O Board to my PXI clock? I would like to synchronize the FPGA clock of my R-series PXI board to the 10 MHz clock in the PXI backplane. Where can I make this setting? URL: http://digital.ni.com/public.nsf/allkb/D108D4AF937524CA862570FF004C2A48

How Do I Synchronize the FPGA Clock in my R-Series Intelligent I/O Board to my PXI clock? I would like to synchronize the FPGA clock of my R-series PXI board to the 10 MHz clock in the PXI backplane. Where can I select this setting? URL: http://digital.ni.com/public.nsf/allkb/53306F0FDA486B298625738A007B130F

R系列Intelligent I/O Board的FPGA Clock要如何和PXI clock作同步的動作？ 我想將R系列PXI卡片上的FPGA clock和PXI背板的10 MHz clock作同步的動作。有相關的選項可以完成這樣的設定嗎？ URL: http://digital.ni.com/public.nsf/allkb/52138E285066FA8D86257405000C8234

How to Reconnect to the LabVIEW FPGA Compile Server I disconnected my compiler client from the compile server and when I tried to reconnect to the FPGA VI by hitting Build in FPGA Project Manager it will recompile again. How can I reconnect to the server without compiling the VI again? URL: http://digital.ni.com/public.nsf/allkb/417E4AE5B5C74BEE862570BB00087933

How Do I Programmatically Reset My CompactRIO Controller? I would like to be able to programmatically reset my CompactRIO controller. Is this possible? URL: http://digital.ni.com/public.nsf/allkb/25825D24D1DF688D8625709D0053FF68