Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

MAX Error 56 When Communicating With a LabVIEW Real-Time Controller I receive Error 56 in Measurement and Automation Explorer (MAX) when I try communicating with my Real-Time controller. My controller is connected with a cross-over cable. The error occurs in one or more of the following URL: http://digital.ni.com/public.nsf/allkb/922DDC440FCB15048625719D006FCB97

FTP Transfer of Files Between Host and Real-Time Targets in MAX How do I use FTP to transfer files between my host machine and a Real-Time target using Measurement and Automation Explorer (MAX)? URL: http://digital.ni.com/public.nsf/allkb/4DCF9D581C491E9F8625711B005FA539

在MAX中通过FTP在主机和Real-Time设备间传输文件 使用Measurement and Automation Explorer (MAX)如何在主机和Real-Time设备间传递文件? URL: http://digital.ni.com/public.nsf/allkb/79128CA06DDE044C862573A6004B3BC5

於MAX中利用FTP在Host Machine及Rea-Time target間傳送檔案 我要如何於MAX中利用FTP在Host Machine及Rea-Time target間傳送檔案？ URL: http://digital.ni.com/public.nsf/allkb/3081FB662FB0B96F86257436000DF8E2

What Does Headless Operation Mean? I was reading the documentation on the Real-Time Series Compact FieldPoint Controllers, as well as the PXI Embedded Controllers and the Compact RIO Real-Time Controllers, and I ran across a paragraph explaining that they are designed for industrial control applications that can perform a URL: http://digital.ni.com/public.nsf/allkb/86936A249D18000186256FBF0075E95D

The Current Time Is Incorrect on My LabVIEW Real-Time Controller Why are the time and date incorrect on my Real-Time Controller and how can I fix this programmatically? URL: http://digital.ni.com/public.nsf/allkb/E9D08C9F795FF49F86256F9000040DC9

PXIシステムとPCを接続するときに、クロスケーブルを使うと通信が遅くなる LabVIEW-RTを使うためにPXIシステムとPCを接続しました。クロスケーブルを使って接続すると、ハブ(HUB)を使った場合と比較して、通信速度がとても遅くなってしまいます。どうしたらよいでしょうか？ URL: http://digital.ni.com/public.nsf/allkb/F595D6DD7941291B86256F6C0025FFA3

Compact FieldPoint 임베디드 컨트롤러에서 Startup.exe 파일을 프로그램적으로 지우는 방법 Compact FieldPoint 컨트롤러에서 Startup.exe 파일을 프로그램적으로 지워야 합니다. 그러나 안전모드(safe mode)로 부팅하지 않고는 startup 실행파일을 지울수 없는 걸로 알고 있습니다. 안전모드로 부팅하지 않고 지우는 방법은 없습니까? URL: http://digital.ni.com/public.nsf/allkb/7F7928325E5E56A786257195000D2B74

Programmatically Deleting a Startup.exe on a Compact FieldPoint Embedded Controller I need to programmatically delete a startup.exe on a Compact FieldPoint controller. I understand that I can not delete the startup executable without booting into safe mode. Is there any work around without booting into safe mode? URL: http://digital.ni.com/public.nsf/allkb/FC8EB163DA4D4FB286256F10005B0418

¿Puedo Realizar Comunicación por Puerto Serial en un Controlador FP/cFP-20xx sin Utilizar LabVIEW RT? Me gustaría comunicarme via puerto serial con un controlador FP-20xx ó cFP-20xx desde LabVIEW. ¿Es esto posible o se requiere LabVIEW RT? URL: http://digital.ni.com/public.nsf/allkb/62E842181ADFD05786256EB600619B79