Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

LabWindows/CVI で作成したDLL をTestStand からコールする方法 LabWindows/CVI で作成したDLL をTestStand からコールさせたいのですが、簡単なサンプルや手順書などはありませんでしょうか。 URL: http://digital.ni.com/public.nsf/allkb/2AFD55BB62C6266E86257273002B6BE0

Physical Memory Allocation Using VISA I'm using CVI and am trying to allocate/access memory inside my PC and then allow my PCI/VISA device to write data to that memory. However, I can't get the physical address of the SDRAM inside my PC to give to my VISA device so that it can write data there over the PCI bus. How can I do this? URL: http://digital.ni.com/public.nsf/allkb/8C4A52AA5FDD5DD9862571C70055FE87

The Commands to My GPIB Instruments Are Truncated When Sent through LabWindows/CVI (Measurement Studio) I downloaded the GPIB drivers for my instrument for LabWindows/CVI from ni.com. When I watch the GPIB bus with NI Spy, the commands sent from within Measurement & Automation Explorer (MAX) are correct, but the commands sent from within LabWindows/CVI are truncated.For example, URL: http://digital.ni.com/public.nsf/allkb/06A9AC3D5F65C63DC1256BE50061E331

How do I perform a double buffered acquisition from a VXI MIO board with a GPIB-VXI/C or VXI-1394 Controller? Niether the GPIB-VXI/C or VXI-1394 controllers support shared memory, which is required for performing a double buffered acquisition. URL: http://digital.ni.com/public.nsf/allkb/560C63F84B1340F386256823004F10AA

What do I Need to Develop CAMAC Module Instrument Drivers? I would like to control some CAMAC modules from a PC, but cannot find instrument drivers for my particular modules on the Instrument Driver Network (IDNET) I noticed that some of the other instrument drivers for CAMAC modules use GPIB commands. What sort of software/hardware do you recommend URL: http://digital.ni.com/public.nsf/allkb/862567530005F09C862565D40011A0F7

Having Both the GPIB-ENET Driver and the SB-GPIB Driver Loaded Can Cause GPIB Errors I was using a GPIB-ENET box with my workstation, but now I have an SB-GPIB board. I am using version 1.3 of the SB-GPIB driver for Sun. If I call the OpenDev function, it returns a -1 and if I use ibdev, it returns a GPIB error 7 (nonexistent GPIB board) error in LabWindows/CVI URL: http://digital.ni.com/public.nsf/allkb/7A562DB58CFB4EDA8625624D0053E84F