Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

我能在LabVIEW 8.0中使用NI Motion Assistant 么？ 我想使用NI Motion Assistant 1.3来生成LabVIEW 8.0代码。当我安装NI Motion Assistant时，发现只有对于LabVIEW 7.x的支持，我能在LabVIEW 8.0中使用NI Motion Assistant 么？ URL: http://digital.ni.com/public.nsf/allkb/AC50A3D053C804E8862573A60046362B

PCI-7390와 Motion Assistant 1.x를 사용하여 코드 생성 NI Motion Assistant에서 디지털 출력을 스텝에 추가하면, 코드생성은 잘못된 포트 ID 값을 사용하게 됩니다. URL: http://digital.ni.com/public.nsf/allkb/4B25FBA7209F68FB862571540023D805

Using Motion Assistant 1.x Code Generation with the PCI-7390 When adding digital output to your steps in the NI Motion Assistant, the code generation uses the wrong port ID values. URL: http://digital.ni.com/public.nsf/allkb/20AEE4EA029F4CED862570AF00042D50

使用Motion Assistant 1.x 的Code Generation功能產生程式碼，搭配PCI-7390。 當在NI Motion Assistant裡面增加數位訊號輸出的步驟以後，code generation會產生錯誤的port ID。 URL: http://digital.ni.com/public.nsf/allkb/B3FEAF0EFFDA6613862571C6005BBAEB

Virtual Motion Boards and Motion Assistant Why am I unable to run a script in Motion Assistant when referencing a virtual board in MAX? URL: http://digital.ni.com/public.nsf/allkb/B8C8B4866CD33E7B86256FA50003B933

在安装完Motion Assistant 1.2或者Driver CD以后，我的73xx NI-Motion板卡再也不能被正确安装了。 最近我安装了Motion Assistant 1.2或者November 2004的Driver CD。尽管我的Motion板卡以前工作正常，但现在再也不能了。为什么？ URL: http://digital.ni.com/public.nsf/allkb/B8525DF3FA74EF5148256F8D000A9D1F

After Installing Motion Assistant 1.2 or the Driver CD My 73xx NI-Motion Board(s) No Longer Install I have recently installed drivers from either the Motion Assistant 1.2 installer or the November 2004 Driver CD. Though my motion controller board previously worked, it no longer functions. Why is this? URL: http://digital.ni.com/public.nsf/allkb/B62DBD669A7B3AF586256F88005C39DA

Motion Assistant 1.2をインストールするとPCI-7344が認識されなくなります NI-Motion 6.1.5をインストールし、PCI-7344を正常に認識しました。Motion Assistant 1.2をインストールするまでは全く問題なく動作していましたが、Motion Assistant 1.2のインストールを行うと、Measurement and Automation Explorer (MAX)にデバイスが表示されなくなり、Windowsのデバ URL: http://digital.ni.com/public.nsf/allkb/EAE83BEDE97D27EF86256F87001C25EC

Motion Assistant 1.2をインストールするとPCI-7344が認識されなくなります NI-Motion 6.1.5をインストールし、PCI-7344を正常に認識しました。Motion Assistant 1.2をインストールするまでは全く問題なく動作していましたが、Motion Assistant 1.2のインストールを行うと、Measurement and Automation Explorer (MAX)にデバイスが表示されなくなりWindowsのデバイ URL: http://digital.ni.com/public.nsf/allkb/76CDAEE55D61269786256F87001C27A5

Troubleshooting the Licensing and Activation of Motion Assistant I recently installed Motion Assistant 1.2 on a new computer and am having problems with the licensing and activation of this software. Whenever I attempt to apply an activation code, one generated through the internet or by calling technical support, I receive an error saying that my code is not URL: http://digital.ni.com/public.nsf/allkb/6B8808084326980886256F7F007D6D1F