Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

What Is INI-XML Converter And When I Should Use It? Problem: What Is INI-XML Converter And When I Should Use It? Solution: The converter utility is installed and run as part of the IVI Compliance Package 2.0 installation. URL: http://digital.ni.com/public.nsf/allkb/6F40C524DF3D97E886256D18005E62F8

IVI Engine No Longer Exports Configuration Functions Prior versions of the IVI Engine included functions for adding and removing configuration items like logical names and hardware resource descriptors at run-time. The conversion to the IVI Foundation-defined IVI Configuration Store made those functions obsolete, and they are no longer exported from URL: http://digital.ni.com/public.nsf/allkb/CBD076776F991D9186256D1700655A7D

Reverting Back to Previous IVI Software After Installing IVI Compliance Package How do I revert back to my previous IVI products and settings after installing the IVI Compliance Package 2.x? URL: http://digital.ni.com/public.nsf/allkb/F0F3879512239B8886256CF3007BEE4F

Communicating with an Ethernet Controlled Instrument in LabVIEW Using LabVIEW, how do I read data from an instrument with an Ethernet connection? URL: http://digital.ni.com/public.nsf/allkb/22F1F2ABC640D5BA86256CD1003BA06D

Ethernet 이더넷 장비를 LabVIEW로 통신하는 방법 LabVIEW를 이용하여, 이더넷으로 연결되는 장비의 데이터를 어떻게 읽어올 수 있습니까? URL: http://digital.ni.com/public.nsf/allkb/B7427E36C5B3688D862574670006B9AE

IVI Names in the IVI Compliance Package 2.0 and later Are Case-Sensitive The IVI Compliance Package 2.0 (ICP 2.0) and later versions handle all names as case-sensitive. If you use logical names, driver session names, or virtual names in your program, make sure that the name you use matches the name defined in the IVI Drivers section in the Measurement and Automation URL: http://digital.ni.com/public.nsf/allkb/B83C7BBD43FD855486256CD10077EF06

連接到經由乙太網路控制的示波器 我該如何使用LABVIEW經由乙太網路連線去讀取來自Tektronix's 3054示波器的資料? URL: http://digital.ni.com/public.nsf/allkb/36807FFBF44B1160862570D0002B46B0

Error -1073807339 in the Xantrex XT-20-3 Power Supply LabVIEW Instrument Driver I downloaded the LabVIEW instrument driver for XT series power supplies from the National Instruments web site. When I try to run the Getting Started Example VI, I receive error -1073807339. How can I resolve this? URL: http://digital.ni.com/public.nsf/allkb/D6D1DA65159A3AFD86256C56005F1424

Sharing an IVI Driver Among Multiple GPIB Devices I have two IVI devices that will use the same driver. However, when I configure the Driver Session, I must specify the address of the instrument (Resource Descriptor). I would like to use both instruments on the same GPIB network. Even when I create separate Logical Names for the URL: http://digital.ni.com/public.nsf/allkb/C8B078CD1F57D22886256B3D00725336

IVI Error BFFA0016: 'Attribute Already Has a Value Waiting to be Updated.' While using an IVI driver, I sometimes get the IVI error message "Attribute already has a value waiting to be updated." (Error number BFFA0016) . This error occurs intermittently. What exactly does this mean and what can I do to the instrument driver or in the code that communicates with the URL: http://digital.ni.com/public.nsf/allkb/BCB3F94F667EBBA186256A01006C6440