Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

IVI-C Class Driver Support for IVI-COM Specific Drivers How can I use IVI-C and IVI-COM specific drivers interchangeably in the same application? Can I use IVI-COM specific drivers with NI TestStand, NI Switch Executive, or the IVI Class Drivers in LabVIEW and CVI? URL: http://digital.ni.com/public.nsf/allkb/5499F9DBD07522F686256F260066BA86

為什麼我得到錯誤-1074130429 當我在LabVIEW中使用IVI 驅動程式? 為什麼我得到錯誤-1074130429 當我在LabVIEW中使用IVI 驅動程式? 例如，錯誤訊息是:IviRFSigGen Initialize With Options.viDriver Status: (Hex 0xBFFA1203)Primary Error: (Hex 0xBFFA1203) The session name or logical name could notbe resolved to a session or driver session.Elaboration: IviConfigServer.IviCo URL: http://digital.ni.com/public.nsf/allkb/3B3E8E86AC42C0B586256F3F002A927C

How Do I Port My IVI Logical Names to Another Computer? I am creating a LabVIEW application that uses IVI instrument drivers. I am developing my code on one machine and then targeting my application to another machine. I want to port my Logical Names, Driver Sessions, and other IVI configuration data to my target machine. This way, the data will show up URL: http://digital.ni.com/public.nsf/allkb/8425DA9C78C0712A86256F0300810986

Error -1074135024 In Calibration Executive Procedure For Agilent 3325B I get Error Code -1074135024 in Calibration Executive when I'm running the procedure for the NI 4472 DSA device. At the step regarding the Agilent 3325, it gives the error message shown below. URL: http://digital.ni.com/public.nsf/allkb/E03677C1B01816ED86256EED0065D27A

Run-Time Configuration of IVI Instrument Drivers Is there is an API for run-time configuration of IVI drivers? I would like to configure IVI instrument drivers under MAX with a CVI application. URL: http://digital.ni.com/public.nsf/allkb/F25F9B0E8DA4BB2386256DEF00729F81

Creating the IVI-Compliant Specific Driver Installer I have developed an IVI specific driver, and now I would like to create an IVI-compliant installer for it so that the software module information shows up in MAX (Measurement and Automation Explorer). URL: http://digital.ni.com/public.nsf/allkb/6F8D1A6D5428C77A86256DC000709710

Are IVI Drivers Supported on Non-Windows Operating Systems? I am using LabVIEW and a GPIB device on a non-Windows operating system to communicate with a GPIB instrument. I found an IVI Driver for my instrument on the National Instruments Instrument Driver Network. Are IVI Drivers compatible with non-Windows operating systems? URL: http://digital.ni.com/public.nsf/allkb/CCA4B8A689D1B2E186256D9B00739F81

How Can I Set the GPIB Timeout When Using an IVI Driver? I am using an IVI driver. With VISA, I could set the timeout value for GPIB communication. There does not appear to be a way to set the timeout value when using an IVI driver. URL: http://digital.ni.com/public.nsf/allkb/4556968492A0770F86256D49007D5E4F

2711 installation error when installing Measurement Studio 6.0 after installing NI-Switch 1.6.1 and IVI Compliance Package 2.0 If you install the following products in the order specified bellow: NI-SWITCH 1.6.1 and previous IVI Compliance Package 2.0 Measurement Studio 6.0you might encounter error message Error 2711 about the IVI MAX provider during URL: http://digital.ni.com/public.nsf/allkb/79E90A70CF7E7B3786256D180059EBC9

IVI Shared Components and How To Uninstall The IVI Shared Components are installed as part of IVI Compliance Package 2.0. What are they and why do I need them? URL: http://digital.ni.com/public.nsf/allkb/5FAC92110A45875F86256D180057F075