Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

What Version of IVI Shared Components Do I Have? Problem: How do I find what version of IVI Shared Components I have? Solution: The IVI Shared Components are installed as part of the IVI Compliance Package. Measurement and Automation Explorer only lists what version of the IVI Compliance Package is installed. URL: http://digital.ni.com/public.nsf/allkb/066D156B7EBA6081862575B5007C62D6

Installing IVI Support for Real-Time Targets I have written third-party drivers to be used for my Real-Time (RT) target, but I cannot install the IVI Compliance Package under Add/Remove Software in Measurement & Automation Explorer (MAX). How do I install IVI support for my target? URL: http://digital.ni.com/public.nsf/allkb/1E36C99C8499E5F3862575AC00620674

IVI Configuration Server Error When I select the IVI Drivers category in MAX, the Information tab displays the error message The provider was unable to instantiate the IVI Configuration Server, like the image seen below. I am also not able to create any new IVI Driver Sessions or Logical Names because the options are grayed out. URL: http://digital.ni.com/public.nsf/allkb/4B4D667C9F2C502586257559000CAB42

Change Triggering Modes on the Tektronix TDS 3054C I downloaded the instrument driver for my Tektronix TDS 3054C oscilloscope. How do I change the triggering mode between auto and normal? URL: http://digital.ni.com/public.nsf/allkb/4279D795B551AC3D862574F2005F03A7

How Do I Move an Instrument Driver Outside of the LabVIEW Instrument Library? What steps are required to move an Instrument Driver folder that is located in the Instrument Driver Library to another location and have LabVIEW link it to an application? URL: http://digital.ni.com/public.nsf/allkb/AD9BB529280155F5862574C60047D1DE

Using IVI Driver to Control PXI Modular Instruments I can use an IVI driver to control Digital Mutimeters (DMM) such as the Aglient 34401A and Fluke 45, but I can not control my National Instruments DMM. URL: http://digital.ni.com/public.nsf/allkb/91CDC5E767B90CD48625749E002F65B4

How Can I Find and Install an Instrument Driver For My Instrument? I have a third party instrument and I want to use it with LabVIEW or LabWindows/CVI. Where do I find the appropriate drivers? URL: http://digital.ni.com/public.nsf/allkb/78FDB0C0DA2448E8862573B8005B64ED

장비에 맞는 인스트루먼트 드라이버 찾기와 설치하기 타사의 장비를 LabVIEW 혹은 LabWindows/CVI와 사용하고 싶습니다. 장비에 맞는 드라이버를 어디에서 찾을 수 있나요? URL: http://digital.ni.com/public.nsf/allkb/23D9C9C227E18F9F862574660007E27C

Error -1074135023 in TestStand when Initializing an IVI-COM Device I have defined an IVI-C step in the main sequence to initialize my Agilent function generator, but I am getting an error -1074135023 when I try to do so. What am I doing wrong and how can I fix this problem? URL: http://digital.ni.com/public.nsf/allkb/753969525279FA0D862573AD005E9ED4

Why Do I Have Problems Viewing Modular Instruments' Soft Front Panels in MAX? In Measurement & Automation Explorer (MAX), if I select Tools » Soft Front Panels, the only option I see is the ni5660 RFSA Demo Panel. I have all the Modular Instruments instrument drivers installed on my computer, but I cannot select a soft front panel for any of the other products..I have the NI URL: http://digital.ni.com/public.nsf/allkb/0D16AF48A330DA5D862573A2005E94DE