NI-5404 頻率產生器 Duty Cycle 之解析度與準確性
當使用 NI-5404 頻率產生器產生特定 Duty Cycle 的時脈輸出時，其解析度與準確性為何?
URL: http://digital.ni.com/public.nsf/allkb/332732EF826F8D5A8625735D001C4E75
|
Oscillating Analog Output Signal from PCI-6704
I am using a PCI-6704 board to drive my external circuit. When I output 5 volts to my circuit, the output signal measures 4.4 volts. If I measure the value of my analog output signal when the card is not connected to my external device, I measure the expected 5 volts. Why do I see a
URL: http://digital.ni.com/public.nsf/allkb/B0DA63E0671E61A086257210007DD4D5
|
什么是锁相环有效的输入？
我需要对我模块化仪器上的参考时钟锁相（PLL），什么是我能用的有效值？
URL: http://digital.ni.com/public.nsf/allkb/23BE94F6FFB23D5A4825717D002094D4
|
PCI 6703/6704 Devices Appear Under Traditional DAQ Devices But Not Under NI-DAQmx Devices in MAX
I have installed both the Traditional and DAQmx drivers and I can see my PCI 6703/6704 in MAX under Traditional NI DAQ Devices, but I do not see it under DAQmx Devices. Why is this?
URL: http://digital.ni.com/public.nsf/allkb/002F195619F28C458625710E0058DB0C
|
Error -1074118655, -1073807343 o -1074118644 Ocurre Cuando se Direcciona a un Instrumento PXI
Cuando trato de abrir una sesión para mi Instrumento PXI (NI-DMM, NI-FGEN, NI-SCOPE, NI-HSDIO, NI-SWITCH) o intento validar mi dispositivo virtual en NI Switch Executive, obtengo uno de los siguientes errores. ¿Qué significa esto?
URL: http://digital.ni.com/public.nsf/allkb/4FA13293B85321868625741E00760C80
|
Error -1074118655, -1073807343 or -1074118644 Occurs When Addressing a PXI Instrument
When I try to open a session to my PXI instrument (NI-DMM, NI-FGEN, NI-SCOPE, NI-HSDIO, NI-SWITCH) or try to Validate my Virtual Device in NI Switch Executive, I get one of the following errors. Why is this?
URL: http://digital.ni.com/public.nsf/allkb/8130049893D6461E86256F3B00461E1B
|
PXIデバイスのアドレス設定で、Error -1074118655、 -1073807343、 -1074118644が発生するときの回避方法
PXIモジュール型計測器[NI-DMM, NI-FGEN, NI-SCOPE, NI-HSDIO, NI-SWITCH]とセッションを開こうとすると、エラー[-1074118655、 -1073807343、 -1074118644]になってしまいます。これはなぜですか？
URL: http://digital.ni.com/public.nsf/allkb/033CC9D6A549D15586256FE400042E7A
|
My PCI-6722 Analog Output Board Outputs 10 Volts Upon Power Up.
Why does my PCI-6722 board output 10 Volts when it powers up? I want it to output 0 volts when it powers up. I am using the NI-DAQ 7.1 driver.
URL: http://digital.ni.com/public.nsf/allkb/F175871A1BB8990186256E9400651885
|
PCI-6722 아날로그 출력 보드가 전원을 켜면 10Volts 를 내보냅니다.
왜 PCI-6722 아날로그 출력 보드가 전원을 켜면 10Volts 를 내보내나요? 전원 켤때 0 volts 를 내보내기를 원합니다. NI-DAQ 7.1 드라이버를 사용하고 있습니다.
URL: http://digital.ni.com/public.nsf/allkb/1C26A4CF576A031086256F1800180DF2
|
What are the Valid Phase-Lock Looping Reference Clock Parameters for Modular Instruments?
I need to Phase-Lock Loop (PLL) my reference clock on my Modular Instrument, what are the valid values that I can use?
URL: http://digital.ni.com/public.nsf/allkb/FA7810B075EF6A9F86256E5300616E51
|
