What Do I Do When the Status LED on my cFP-2020 Stays Lit?
I just powered up my cFP-2020 and the Status LED is staying lit. According to the cFP-20xx manual, the controller did not power up correctly and I should contact National Instruments. How do I fix this?
URL: http://digital.ni.com/public.nsf/allkb/2BAB7963FD9286B18625738B000495DC
|
我应当怎么做如果我的cFP-2020持续点亮？
当我给我的cFP-2020上电的时候,状态指示灯持续点亮. 参考cFP-20xx的用户手册, 是由于控制器并没有正确的被上电,应当联系National Instruments. 我应该怎么做才可以解决这个问题?
URL: http://digital.ni.com/public.nsf/allkb/C3C035244D1E95E7862573CA004712F8
|
Why Am I Getting Intermittent Communication Loss With My FieldPoint Controller?
I am getting intermittent communication loss with my FieldPoint controller. What might be causing this and how can I fix it?
URL: http://digital.ni.com/public.nsf/allkb/EDDE08A1208252548625734000619451
|
cFP-180x Firmware Upgrade Fails on the 10.0.54 Subnet
The firmware upgrade fails when my cFP-180x is on the 10.0.54 subnet. It begins to upgrade and then terminates. How do I get around this?
URL: http://digital.ni.com/public.nsf/allkb/6A9C6B3D1BE8DA5786257338007B9080
|
[c]FP-RTD-124 Returns Noisy or Fluctuating Measurements
Problem: Why does my [c]FP-RTD-124 return noisy or fluctuating measurements? Solution: National Instruments recently discovered that FieldPoint and Compact FieldPoint [c]FP-RTD-124 modules may take noisy or fluctuating measurements at power up. Often, measurements stabilize after several seconds.
URL: http://digital.ni.com/public.nsf/allkb/3784655EFDDDE51E862572CF007A7D62
|
Can a cFP-2120 Operate Without a Backplane?
I have a system that I want to run headless on a cFP-2120 Real-Time controller. It does not need any modules connected. In order to save money and space, can I run the controller without a backplane?
URL: http://digital.ni.com/public.nsf/allkb/0987074DB52DDC068625721200771719
|
Startup EXE not Launching on Real-Time (RT) Target at Controller Reset
I have a real-time system with a startup EXE embedded on the controller. However, the EXE only launches when the controller is connected to the ethernet/network cable. Whenever the ethernet cable is removed, the startup EXE does not launch on controller reset.
URL: http://digital.ni.com/public.nsf/allkb/52E943F7D6E7C0578625720A001DDF6E
|
Why Is LabVIEW RT 8.20 on My cRIO Controller but Not on My Host?
LabVIEW RT 8.20 is installed on my cRIO controller, but I am using LabVIEW RT 8.0 or previous on my host PC. How did this version get there and how can I change it back?
URL: http://digital.ni.com/public.nsf/allkb/9E8786A9E32C5804862571DA0004673D
|
为什么LabVIEW RT 8.20在我的cRIO 控制器上却不在我的主机上？
在我cRIO控制器上安装了LabVIEW RT 8.20的版本, 但是在我的PC主机上使用的却是LabVIEW RT 8.0活着更早的版本, 如何在这两种版本之间建立通信, 或者如何将控制器上的版本变成更早先的LabVIEW RT版本?
URL: http://digital.ni.com/public.nsf/allkb/E9B046C4D6C8DC0D8625735B002FF636
|
cFP-1808을 사용하는 법
또한 Shared Variables을 이용하여 cRIO, CVS, 그리고 PXI RT 등의 임베디드 시스템에도 연결하여 사용할 수 있습니다. 사용 가능한 프로그래밍 언어는 LabVIEW, LabWindows/CVI, Measurement Studio, Lookout, 그리고 OPC Client 응용 소프트웨어 등입니다.
URL: http://digital.ni.com/public.nsf/allkb/5139AF159B618F188625712600300927
|
