Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Changes to the Signal Mapping Settings for MXI-2 Interface Not Showing I changed the signal mappings for my MXI-2 interface in MAX, but they don't seem to change anything. How do I get these changes to show up? URL: http://digital.ni.com/public.nsf/allkb/55E1273776966F3D862571500052E889

光ファイバ接続のMXI-4とメタルケーブル接続のMXI-4の混在 光ファイバ接続のMXI-4とメタルケーブル接続のMXI-4を使って、PXIシャーシをデイジーチェーン接続しようと思いますが、問題はありませんか？ URL: http://digital.ni.com/public.nsf/allkb/CD95E283C8FB34F086257057002ABC23

MXI-4は、ドライバのインストールが必要ないのですか？ MXI-4（PCI-8336）を使って、PXIシャーシを接続しようとしています。MXI-4のドライバをインストールしていないのに、MXI-4が認識され、PXIシャーシも正しく認識されました。MXI-3はドライバのインストールが必要ですが、MXI-4は、ドライバのインストール URL: http://digital.ni.com/public.nsf/allkb/2B141C4A165D7BA386256FB10026AF41

Why Are My VME Instruments Listed Under 'Unassigned VME Devices' in MAX? I have a VME or VXI system that uses VME devices. Everything used to work fine, and all of my VME devices were listed under a Frame in MAX. I ran the VXI Resource Manager (Resman) and some or all of my VME devices are not listed under a Frame, but they are listed under Unassigned VME Devices. The URL: http://digital.ni.com/public.nsf/allkb/676F38BA7B9F630C86256E52005D0D3E

Who is the Manufacturer of the CMOS Battery in the 871 and 872 VXIpc Controllers? I would like to replace the CMOS battery on my VXIpc, however the battery type and manufacturer are not listed in the user manual. Who manufactures this battery? URL: http://digital.ni.com/public.nsf/allkb/F3F60706D64ACC0086256E15007D7F9F

Does the PCI MXI-4 Require Power From the 3.3V PCI Power Rail? Does the PCI-8331 and PCI-8336 (MXI-4) Require Power from the 3.3V PCI Power Rail? URL: http://digital.ni.com/public.nsf/allkb/3F34EDF9064EB80B86256DCD001799AF

PCI MXI-4 가 3.3V PCI 전원이 필요합니까? 문제점: PCI-8331 과 PCI-8336 (MXI-4) 가 3.3V PCI 전원이 필요합니까? 솔루션: 예. PCI MXI-4 카드는 PCI 백플레인에서 5V 와 3.3V 모두의 전원을 필요로한다. URL: http://digital.ni.com/public.nsf/allkb/522DA611A08DEB88862570360036D193

How Can I Use MXI-3 Over a Long Distance? I would like to use PXI with MXI-3 as a remote system over distances much greater than the 200 meter maximum distance specification. Can I simply use an Ethernet repeater? Has anyone used MXI-3 over distances greater than 200 meters? URL: http://digital.ni.com/public.nsf/allkb/86256F0E001DA9FC86256A0000713041

Incorrect Value in Online Help for Load Breakpoint Modulus for ValueMotion The following is an excerpt from the Online Reference for the Load Breakpoint Modulus command (ValueMotion).If Breakpoint Modulus is: 10,000 quadrature countsIf the present position is: -25,000 and the loaded Breakpoint position is: 2,500 when the b URL: http://digital.ni.com/public.nsf/allkb/3D69AC1CB95A150786256E8E00231F38

Why Does Resource Manager Hang? When trying to recognize and configure my VME-MXI-2 controller and chassis, Resource Manager (resman) hangs. How can I either overcome this or narrow down the cause of the hang? URL: http://digital.ni.com/public.nsf/allkb/EC0405C6A719DCE486256556006AF870