Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Are There Fuses on the SC-2345 or the SCC-Modules? Problem: Does the SC-2345 or any of the SCC modules have fuses? Solution: No, neither the SC-2345 or the SCC modules that go in the SC-2345 have any type of fuses. URL: http://digital.ni.com/public.nsf/allkb/A95E3461762EEDCB86256D4E005A3198

SC-2345或是SCC的modules裡面有保險絲嗎? NI Home This Document is not yet Rated Rate this Document SC-2345或是SCC的modules裡面有保險絲嗎? 硬體: SCC>>Carriers>>SC-2345 問題: SC-2345或是SCC的modules裡面是否有保險絲? 解答: 沒有，不管是SC-2345或是SCC的modules裡面都沒有任何type的保險絲，如果你的訊號強度有可能高於模組，載具或DAQ卡的規格，你應該用一個快熔保險絲(在電子材料行就可買到)跟訊號串聯。 相關連結: Product Manuals: SC-2345 User Manual URL: http://digital.ni.com/public.nsf/allkb/4D65F7C2A572F3C386257148003AAD72

Recommended NI Hardware for Thermocouple Measurements What is the best NI hardware to use for taking thermocouple measurements? URL: http://digital.ni.com/public.nsf/allkb/F0196F5B6CD8F60286256D4B00728B78

Signal Coming From Strain Gauge Module Cuts Off At 100 mV I have a SC-2345 with the SG-04 strain gauge module. I am acquiring data correctly, but my signal cuts off at 100 mV. I have increased the limits on my graph, but my data will not go higher than 100 mV and will not go lower than -100 mV. Why is this happening? URL: http://digital.ni.com/public.nsf/allkb/06149937B16A82DA86256D42006965BF

Using the SCC-FT01 Feed-Through/Breadboard Module for Custom Digital I/O Signal Conditioning in NI-DAQmx I need to do custom signal conditioning on a digital signal in my SCC system. When I add the SCC-FT01 to my SC-2345 in the SCC Connector Block Configuration in Measurement and Automation Explorer (MAX), I get an error like: URL: http://digital.ni.com/public.nsf/allkb/095F54115CC7BB5386256D17007F79BD

What Are The Dimensions of the SC-2345 Terminal Block? I would like to remove the SC-2345 Terminal Block from its enclosure and place it in my own enclosure. The online catalog and the manual for the SC-2345 give the dimensions for the enclosure but not the actual terminal block. URL: http://digital.ni.com/public.nsf/allkb/5AE369C03FE0D27986256CD0005DA5C9

Can I Use Four SC-2345's with One 64 Channel DAQ Board? I have a 64 channel DAQ Device and I need signal conditioning for all 64 channels. Can I use 4 SC-2345's? URL: http://digital.ni.com/public.nsf/allkb/3E66E95805A1FA7486256CC300465368

Analog Triggers Don't Work Properly with SCC-AI0x module After configuring the DAQ board to use the SC-2345 with an SCC-AI0x as its accessory, analog triggers don't work. How can I get analog triggers to work properly with my SCC module? URL: http://digital.ni.com/public.nsf/allkb/3D072CE329DE55A686256CBC00560178

SCC-AI0xモジュールではアナログトリガが動作しません。 DAQボードをＳＣ－２３４５と組み合わせて使用するようにし、アクセサリとしてSCC-AI0xを設定する場合、アナログトリガが動作しません。アナログトリガをＳＣＣモジュールで正常に動作させるにはどうしたらよいでしょうか？ URL: http://digital.ni.com/public.nsf/allkb/A9F603274793C1E2862570DD0010EF2C

Can I Make Thermistor Measurements with the SCC-RTD01? I would like to make temperature measurements with a thermistor. Can I use the SCC-RTD01? URL: http://digital.ni.com/public.nsf/allkb/643EC228BF88281E86256C6B006F0F2B