Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

What is the Maximum Number of NI 9144 Chassis That Can Be Daisy Chained Together? I know the NI 9144 chassis can be used in a daisy chain. Is there a limit to the amount that can be connected together? URL: http://digital.ni.com/public.nsf/allkb/4229B69C42629C6E86257501001616F3

Which Controllers Can Be Used With The NI 9144? I would like to use the NI 9144 expansion chassis, but how do I know which controllers support this chassis? URL: http://digital.ni.com/public.nsf/allkb/0A7BF9A752748F3B862575010019C641

What is the Absolute Accuracy for Half the Voltage Input Range? URL: http://digital.ni.com/public.nsf/allkb/B9DD447D1F3A4488862574B40004A447

Does the NI-9205/9206 Use the Linearization Coefficients When Returning Calibrated Data in LabVIEW FPGA? Are the Linearization Coefficients used to generate calibrated data for the NI-9205/9206 when the Calibration Mode is set to Calibrated in NI-RIO 2.4 and later? URL: http://digital.ni.com/public.nsf/allkb/F27E1B157F26030E862574A3006E108B

What is the Input Voltage Limitation of the 9425 Module? On page 12 of the 9425 module specifications (linked below), I can read that the maximum input voltage is 60 VDC if using 8 channels, and 30 VDC if using 32 channels. Why does the voltage limitation depend on the number of input channels? URL: http://digital.ni.com/public.nsf/allkb/E74CF0ABC9DC808E8625749E003FB4DF

National Instruments cRIO-9014 Disk On Chip Change Notification The cRIO-9014 revision G or later Real-Time Controller will be shipped with a different 2GB nonvolatile storage Disk On Chip than previous revisions. URL: http://digital.ni.com/public.nsf/allkb/7D7241BE9C7D581F86257435006CB9A2

How do I know if my FPGA VI can be compiled on a chassis I have no access to currently? I have successfully compiled my FPGA VI on a 3M gate cRIO FPGA chassis. How can I find out if I can successfully use this VI on another chassis with fewer number of gates? URL: http://digital.ni.com/public.nsf/allkb/E34D8CCAF3C4F108862574280031CD2E

What is the Analog Input Impedance of the NI 9237? I have an NI 9237 and I would like to know the analog input impedance of the module to incorporate this data into my strain measurements. What is the analog input impedance of the NI 9237? URL: http://digital.ni.com/public.nsf/allkb/01933E0A64F04211862573FD005D992F

Current vs. Voltage Characteristics for C-Series Modules with Current Limiting Architectures What input impedance should I expect when using a C-Series module with a current limiting architecture (9421, 9422 and 9423)? URL: http://digital.ni.com/public.nsf/allkb/7C8EE3C395478645862573FC00783B08

Is the Ethernet Port of the cRIO 9004 Controller Isolated? Problem: Is the Ethernet Port of the cRIO 9004 Controller Isolated? Solution: The ethernet port is magnetically isolated from the rest of the controller hardware. This should be part of the compliance specifications available operating instrucutions for the cRIO 9004. URL: http://digital.ni.com/public.nsf/allkb/6F62A49EE22C8C19862573FB0013CC47