Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

在SignalExpress中使用PXI-5404发送信号。 在SignalExpress中，NI-FGEN发生步骤不识别PXI-5404。我怎么在SignalExpress中识别这张卡呢？ URL: http://digital.ni.com/public.nsf/allkb/BE9E0ECB27426593482571C00011C47C

Generating Signals with the PXI-5404 in SignalExpress The NI-FGEN Generation Steps in SignalExpress don't recognize the PXI-5404 hardware. How can I use this card in SignalExpress? URL: http://digital.ni.com/public.nsf/allkb/5F05562D8D8E19AF862570B6005577A1

Register Level Programming (RLP) Support for the 67xx Boards Problem: Is there RLP support for the 67xx boards? Solution: While there is RLP support for the 671x and 673x boards, there currently isn't RLP support for the 672x boards. For documentation on RLP for the 671x and 673x boards see Related Links. Related Links: Register Map and Description (. URL: http://digital.ni.com/public.nsf/allkb/1655615634A4AB6386257091005DD913

Continuous Self-Calibration of the 670x Devices I want to do register-level programming for my 6703/6704 device. Do I have to program the continuous calibration procedure or is it done by on-board hardware? URL: http://digital.ni.com/public.nsf/allkb/16335B33178CEDF786256F31007BEBFF

5411과 5431 웨이브폼 발생기(Waveform Generators)의 50핀 및 68핀 핀 배치도는 어디에 있습니까? 5411/5431 웨이브폼 발생기(Waveform Generators)의 핀 배치도를 찾으려고 했지만 50핀 커넥터 다이어그램밖에 찾지 못했습니다. URL: http://digital.ni.com/public.nsf/allkb/BE3EEB4110CC06D286256F180057B56B

What are the 50-Pin and 68-Pin Pinouts for the 5411 and 5431 Waveform Generators? I am trying to find the pinouts for the 5411/5431 waveform generators and can only find the 50 pin connection diagram URL: http://digital.ni.com/public.nsf/allkb/10E6C079D9B80ED486256F08005CCD5B

What is the Size of the Pull-Up Resistor on the Digital Lines in the NI 6703/6704 Analog Output Devices? What is size of the pull-up resistor in the NI 6703/6704 analog output devices? URL: http://digital.ni.com/public.nsf/allkb/30441A88E843617C86256EAA006E728D

Can you do Both Waveform and Single Point Update at the Same Time on the Analog Outputs of a PCI-672x? Consider I have 20 Outputs configured as Waveform Output. In this setup, is it possible to configure the remaining outputs as Single Update outputs? URL: http://digital.ni.com/public.nsf/allkb/1B118FC2FFA9EAA286256E830047FD91

How Much Current Will the 54xx Arbitrary Waveform Generators Source? The specifications for the 54xx series of Arbitrary Waveform Generators show an output voltage of either +/-1 V into 50ohms [40mA), +/-5 V into 50ohms (100mA) or +/-6 V into 50 ohms (120mA). How much current can I expect if I'm driving a lower impedance load? What voltage can I expect for URL: http://digital.ni.com/public.nsf/allkb/CC1BF854161E962A86256D90005A9BB7

5401/5411 펑션 제네레이터의 출력값을 바꿀때 출력값이 끊어지는 이유는 무엇입니까? 5401/5411 펑션 제네레이터를 사용하고 있습니다. 출력값을 바꿀때 출력신호가 짧은 시간동안 0 으로 되는데, 그 이유는 무엇입니까? URL: http://digital.ni.com/public.nsf/allkb/9BA719A49DED28C086256D48000CB695