Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Using the BNC-2090A with an Analog Output Series Device The documentation for the BNC-2090A indicates that it can be used with E-Series and M-Series devices. The Analog Output Series Devices use the same 68-pin connector as the E-Series and M-Series devices. Can I use the BNC-2090A with my Analog Output device? If so, which analog output channels URL: http://digital.ni.com/public.nsf/allkb/D74D24D1CE24B71786257420007D33D9

Some Manuals Provide Incorrect Instructions for Accessing the Device Documentation Browser Some DAQ hardware documentation indicates that Start menu shortcuts exist for device documents. However, when I try to access these shortcuts, they are not installed on my system. Have the shortcuts moved? URL: http://digital.ni.com/public.nsf/allkb/AAB917E1AB320301862573E00074E982

Different Types of Isolation: Channel-to-Channel, Bank (Channel-to-Bus), and Channel-to-Earth Ground Isolation What are the differences between the types of electrical isolation NI offers on devices? I do not understand the differences between channel-to-channel, bank (channel-to-bus), and channel-to-earth ground isolation. URL: http://digital.ni.com/public.nsf/allkb/CF71091043A6193B862573D70077138B

Why Does My USB 6008/6009 Have Different Resolutions for Differential and Single-Ended Measurements? The user guide for the USB-6008 and USB-6009 says that there are two different input resolutions: NI USB-6008 12 bits differential URL: http://digital.ni.com/public.nsf/allkb/36D8A8E6F047F313862573D10080547C

Using USB-6525 Digital Outputs I have a USB-6525. When I use my device in Measurement & Automation Explorer (MAX), I can not measure a voltage change with my digital multimeter (DMM) when I set the line/port output to high. Why is there no measurable voltage change? URL: http://digital.ni.com/public.nsf/allkb/B0FF01B2AFFA52FC862573A2005A9570

What Digital Lines are Accessible for PCI-6259 with BNC-2110? I am using two BNC-2110 terminal blocks for digital input or digital output with my PCI-6259 M series DAQ board. The installation instructions do not state the PCI-6259 is compatible with the BNC-2110 and there are more outputs than listed on the breakout box. What are the corresponding URL: http://digital.ni.com/public.nsf/allkb/5B4D23831C6A8C2D86257354004DE008

使用BNC-2110可以访问PCI-6259的哪些数字线？ 我有两个BNC-2110接线盒用于PCI-6259 M系列DAQ卡的数字输入和输出。安装指南中没有指明6259是否和2110兼容，而且2110上有多余的输出口。 那么这些管脚对应于什么？所有的数字输出都是可用的吗？ URL: http://digital.ni.com/public.nsf/allkb/B885BCC8210F812C86257395001FF792

Unexpected Delay When Using DAQmx Analog Start Trigger When I use a DAQmx analog edge start trigger with an M Series DAQ device, my program appears to last 250-300ms longer than when I do not use an analog edge start trigger. Why is this happening, and is there anything that I can do to get around it? URL: http://digital.ni.com/public.nsf/allkb/AF8AA09A3323B0B38625734F00496E02

Where Can I Find Dimensional Drawings for National Instruments Products I have some National Instruments hardware and want to know if there are dimensional drawings available for this device. URL: http://digital.ni.com/public.nsf/allkb/6353EAAD25BE4BDF8625734D006D02CE

Decreased Counter Measurement Resolution With Digital Filtering Why does my counter resolution decrease when I use a digital filter on a counter input task with an NI M-Series or TIO device? URL: http://digital.ni.com/public.nsf/allkb/176C93DAEB2FD1798625733A004D295D