Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

对于PXI/PCI-7831R，我应该如何选择上拉电阻？ PXI/PCI-7831R 的数字输出缺省的设置是只能输出3.3V。根据用户手册，为了能输出5V的数字TTL高电平，我需要添加一个外部的上拉电阻。这时候，输出阻抗是多少？这个电阻值应该是多少？ URL: http://digital.ni.com/public.nsf/allkb/93A7E429E7D487FB86257027002382A9

對於PXI/PCI-7831R，我應該如何選擇上拉電阻？ PXI/PCI-7831R 的數位輸出缺省的設置是只能輸出3.3V。根據用戶手冊，為了能輸出5V的數字TTL高電平，我需要添加一個外部的上拉電阻。這時候，輸出阻抗是多少？這個電阻值應該是多少？ URL: http://digital.ni.com/public.nsf/allkb/85261994496E573B8625704A0036A75C

What Function Do the Switches on the 7831R Provide? There are 3 switches on SW1 of the 7831R. What is the function of each switch? URL: http://digital.ni.com/public.nsf/allkb/FC25150DDBD83F9686256F4300820014

How is the Timeout Specified for the 'Wait on...' I/O Method Node Under FPGA Specifying Timeout When specifying the timeout on the wait on rising edge, falling edge, any edge, high level, low level, there's no information in LabVIEW 8.2 or earlier on what units you use. What units do I use? URL: http://digital.ni.com/public.nsf/allkb/0D8325309894115286256F3B00341159

Can I use LabVIEW 7.0 with FPGA 1.0 on the PCI-7831R or the PXI-7811R? I am using LabVIEW 7.0 with FPGA Module 1.0 and NI-RIO 1.1. I found in the readme for NI-RIO that it supports LabVIEW 7.x and that it supports the PCI/PXI-7831R and the PXI-7811R. Does this mean I can use LabVIEW 7.0 and FPGA Module 1.0 with the PCI-7831R or the PXI-7811R if I have NI-RIO 1.1? URL: http://digital.ni.com/public.nsf/allkb/52C3EE437A633B9986256F0C006DA4DD

RIO/R-Series 보드 케이블의 와이어 게이지 문제점: RIO/R-Series 보드 케이블의 와이어 게이지는 무엇인가요? 솔루션: 30 게이지를 포함한 SCH68-NT-S (P/N: 189041-02)과 같은 차패된 RIO/R-Series 보드 케이블을 말합니다. URL: http://digital.ni.com/public.nsf/allkb/93504C040C9C358386256F2A00210FA4

Wire Gage of the RIO/R-Series Board Cables Problem: What is the Wire Gage of RIO/R-Series Board Cables? Solution: The shielded RIO/R-Series board cables such as SCH68-NT-S (P/N: 189041-02) contain 30 gage (AWG). URL: http://digital.ni.com/public.nsf/allkb/F965A13AC9E29FF386256DC6006A3595

Wire Gage of the RIO/R-Series Board Cables Problem: What is the Wire Gage of RIO/R-Series Board Cables? Solution: The shielded RIO/R-Series board cables such as SCH68-NT-S (P/N: 189041-02) contain 30 gage (AWG). URL: http://digital.ni.com/public.nsf/allkb/9E7F2F8BAEC328D98625710900655864