Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Can I Perform a Multiple Channel Scan on my PCI-1200 Without Using Channel 0? I am trying to perform a multiple channel analog input using my PCI-1200 board, but it seems that I am required to include channel 0 on my channel list. Is there a way around this? URL: http://digital.ni.com/public.nsf/allkb/5362E0D146C9F25E86256BFA0070644D

Using an External Clock with Finite Pattern I/O Problem: How do I use an external clock with finite pattern I/O mode? Solution: When using an external clock with finite pattern I/O mode, a clock edge is required after the final edge to flush the data out of the DIO ASIC and into the computer memory. URL: http://digital.ni.com/public.nsf/allkb/2FB93421FAD8374286256BDF007A78AF

Can I Enable Dithering On a 16-bit E Series DAQ Device? I am trying to enable dithering on my 16-bit E Series DAQ device using either MIO Configure.vi (LabVIEW) or the MIO_Config function (LabWindows/CVI). However, when I use these functions, I get error -10403 (Traditional NI-DAQ) or error -200077 (NI-DAQmx). URL: http://digital.ni.com/public.nsf/allkb/41B0890ABC09B0CB86256B92007E64F5

PC-LPM-16/PnP보드에서 디지털 입력과 출력 라인의 power-up 상태는 어떻게 되나요? PC-LPM-16/PnP보드는 8개의 디지털 입력 라인과 8개의 디지털 출력 라인을 가지고 있습니다. 보드가 power-up이 되면 로직상태는 어떻게 되나요? URL: http://digital.ni.com/public.nsf/allkb/F9BA36E30EAEE79F86256FD3000CB27D

What Are the Power-Up States of the Digital Input and Output Lines on the PC-LPM-16/PnP? The PC-LPM-16/PnP has 8 Digital Input lines and 8 Digital Output lines. What state are they when the board powers-up? URL: http://digital.ni.com/public.nsf/allkb/92C7BBD10540246286256B84007CA581

Line Directions with Handshaking and Pattern I/O Can I configure individual data line directions in handshaking or pattern I/O mode on my digital data acquisition (DAQ) board? URL: http://digital.ni.com/public.nsf/allkb/5B8FFBC20987332586256B670070C0D5

Differences Between Lab-PC-1200 and PCI-1200 I have a Lab-PC-1200 and I am thinking of buying a PCI-1200. I need to know the main differences between the two cards other than the fact that Lab-PC-1200 is an ISA-bus board, and the PCI-1200 is a PCI-bus board. URL: http://digital.ni.com/public.nsf/allkb/53FE6131883227C986256B14005EE2F6

DAQPad-1200 Device Not Responding to First IRQ Level Using Windows After installing a DAQPad-1200 on a Windows computer, attempting to use test panels in Measurement & Automation Explorer returns the error 'The device is not responding to the first interrupt level. Do you wish to continue?' Why does this error occur? URL: http://digital.ni.com/public.nsf/allkb/B5D63EDC141548B586256ADF005553A2

How Are the Digital Input and Output Ports of the DAQCard-700 Numbered? I am trying to do digital operations with my DaqCard-700. I am receiving error 10614, 'The specified group does not support the specified transfer direction'. The user manual does not state which port number to use for input and which to use for output. URL: http://digital.ni.com/public.nsf/allkb/533841232BE87E5F86256AC500739553

Can I Do Continuous Double Buffered Digital Input Or Output With My PCI-6503 Board ( 8255 Chip ) ? I want to make continuous or double buffered digital input or output with my PCI-6503 board, is this possible ? URL: http://digital.ni.com/public.nsf/allkb/1B82FBCE3140D0C986256AB100743648