How Can I Specify Acceleration, Velocity, and Deceleration for a Contoured Move?
How can I specify acceleration, velocity, and deceleration profiles for a contoured move when the trajectory generator on the motion controller is not used during a contoured move?
URL: http://digital.ni.com/public.nsf/allkb/F58339DBA74CF728862573760005B0B1
|
How Can I Trigger an Event Off of an Encoder Line (A, B, or Z)?
I would like to trigger an event on my 733x, 734x, or 735x motion controller card based off of an encoder line (A, B, or Z). How can I do this?
URL: http://digital.ni.com/public.nsf/allkb/70BF642F99126FC38625736F0056D7AB
|
Tuning a Motion Controller for Different Dynamics Forward and Backward
I have a closed-loop system that is driven by a 7340 motion controller. The load moves in the vertical direction. Due to the effects of gravity, I have different loading parameters when traveling downward opposed to traveling upward. How can I tune my motion control card to compensate for the
URL: http://digital.ni.com/public.nsf/allkb/8108FBCAF15FDEE0862572DE0071AE6B
|
前向或后向运动中调整电机控制器的参数
我有一个用7340 motion控制器驱动的闭环系统。负载进行垂直方向运动。因为重力的影响，相对于向上运动，我有不同的负载参数用于向下运动。当进行上下不同方向运动时，如何调整motion控制卡的参数来补偿变化的运动？
URL: http://digital.ni.com/public.nsf/allkb/8E8F8818E391AAD9862574000018BBB7
|
Configuring Axis Resources for a Motion Dual-Loop Feedback System
I would like to use dual encoders, but I only have two axes on my MID. Measurement & Automation Explorer (MAX) defaults dual encoding to Axis 1 and 3, but I need to figure my second feedback encoder to a different axis on my UMI. Is this possible?
URL: http://digital.ni.com/public.nsf/allkb/57980429F24F87058625727D0003384F
|
How do I synchronize 2 NI-Motion Control Boards?
Is it possible to synchronize 2 or more NI-Motion control boards? If so, how do I do it?
URL: http://digital.ni.com/public.nsf/allkb/D611E9F18CF4A2018625727B004CEA09
|
如何同步两块NI-Motion 控制卡？
可以对两块或者多块NI-Motion控制卡进行同步吗？如果可以，怎么同步？
URL: http://digital.ni.com/public.nsf/allkb/794D7495F68D984A862574000017B2C2
|
Axis Stops Working when using 'Configure Axis Resources.flx'
I am able to control all of my Axis in MAX without any problem, but when I try to setup my feedback in LabVIEW using 'Configure Axis Resources.flx', I cannot get my Axis to work. What am I doing wrong?
URL: http://digital.ni.com/public.nsf/allkb/0098756B8B8C85DF8625723E0006002F
|
Velocity Filter Settings in NI-Motion
I am using the NI-Motion driver, and I would like to filter the velocity from my encoder feedback. What do the velocity filter settings mean, and how can they be set?
URL: http://digital.ni.com/public.nsf/allkb/500890E58463AB668625723500760EE7
|
设置运动控制器的模数转换(ADC)范围
我使用Read ADC VI来读取运动控制器上的一个模拟电压。使用Set ADC Range VI来更改电压的范围，但是在我读出来的数值没有变化。为什么Set ADC Range VI不工作也没有返回错误？
URL: http://digital.ni.com/public.nsf/allkb/41C73541908FC81B4825721900239EC9
|
