Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

How Do I Check the Status of the Relays on My NI 948x Compact DAQ Relay Module? I am using an NI 948x relay module with Compact DAQ. I know that I can use the DAQmx Write VI to open and close the relays, as explained in KnowledgeBase 44LAPTNP: What Functions Do I Use to Operate My URL: http://digital.ni.com/public.nsf/allkb/65A3DB0767ED26478625734C007271C8

Configuring CompactRIO Real-Time Controllers to Synchronize to SNTP Servers Is it possible to configure CompactRIO Real-Time controllers to use an SNTP or other time server? URL: http://digital.ni.com/public.nsf/allkb/F2B057C72B537EA2862572D100646D43

How to Set the Sampling Rate of the NI-9217/9219 When I try to take measurements with the NI-9217 or NI-9219 module, I see many repeated samples. In effect, I only receive new samples at a fraction of the rate that I expect. How can I control the sampling rate of the module? URL: http://digital.ni.com/public.nsf/allkb/1015F4182FB8A805862572D1006B4CC1

Using the SMB Connector for Digital I/O or Drift Compensation on cRIO-901x and 9074 Controllers The Operating Instructions manual for cRIO-9012/9014/9074 controllers states the following: "The software that supports GPS drift-correction and other digital I/O through the SMB connector was not available when this manual was published. Please contact National Instruments for URL: http://digital.ni.com/public.nsf/allkb/173D82D2BFAAEA12862572D1006098B4

Using the SMB Connector for Digital I/O or Drift Compensation on cRIO-901x and 9074 Controllers The Operating Instructions manual for cRIO-9012/9014/9074 controllers states the following: "The software that supports GPS drift-correction and other digital I/O through the SMB connector was not available when this manual was published. Please contact National Instruments for URL: http://digital.ni.com/public.nsf/allkb/C11571D3F53DAC6C862574C9004C1A3C

¿Cómo Puedo Implementar un Timeserver (Servidor de Tiempo) con CompactRIO? ¿Es posible usar cRIO con un Timeserver?. He modificado el registro del archivo .ini pero no se activa. URL: http://digital.ni.com/public.nsf/allkb/6B53895746251C27862573C600697E09

在cRIO-901x控制器上使用数字I/O的SMB连接器 cRIO-901x 控制器的操作指南手册指出 : "在本手册发布时，支持GPS的漂移校正和其他通过SMB连接头的数字I/O的软件还未发布.请联系 National Instruments 获取更多信息." 如何在这些控制器上使用SMB连接头？ URL: http://digital.ni.com/public.nsf/allkb/21BE12B6579C9B6E862573A60035D93E

如何設定 NI-9219 的取樣頻率〈Sampling Rate〉 當我試著用 NI-9219 模組量測訊號時，我得到許多重複的取樣點。實際上，資料值變化的速率只有我設定取樣頻率的幾分之一。我要如何控制 NI-9219 模組的取樣頻率？ URL: http://digital.ni.com/public.nsf/allkb/5B6B0A73702FB166862573A70028A818

我該如何在 CompactRIO 上製作一個Timeserver 有可能使用 cRIO 當作 timeserver 嗎? 在 ini 檔案中有一個 entry 有關於這個但是我無法啟動它？ URL: http://digital.ni.com/public.nsf/allkb/782F2F0290036790862573D3003B61B3

如何增加FieldPoint或者cRIO RTD模块的范围？ 我有一个RTD，其电阻值超出了我的RTD模拟输入模块指定的测量范围。可否扩展最大阻值以使我的RTD能够测量？ URL: http://digital.ni.com/public.nsf/allkb/3437EF0534231DEC482572BA0012011F