Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Why Does My Specified Channel Not Work as an Analog Trigger Source in DAQmx? I have configured my analog trigger to trigger off of one of my device's analog input channels, but I receive DAQmx error -200265. URL: http://digital.ni.com/public.nsf/allkb/BEBB10D02D72798A8625736B0076B09A

Understanding and Avoiding Overwrite and Overflow Errors with NI-DAQmx What are overwrite and overflow errors, and how can I avoid them when using NI-DAQmx? URL: http://digital.ni.com/public.nsf/allkb/6C05A002FAE4F9F68625734C0059B4EF

理解并避免DAQmx中的数据覆盖错误(Overwrite)与数据溢出错误(Overflow) 什么是数据覆盖错误(Overwrite)与数据溢出错误(Overflow)，我怎样才能够在使用NI-DAQmx的时候避免它们的出现？ URL: http://digital.ni.com/public.nsf/allkb/EBB4B16EF1EF9D54862573C4001050B8

Internally Routing Counter Signals in LabVIEW I want to route the output signal of one counter to the source/gate of another counter on the same card or to a specific PFI line. Can I do this without externally connecting the two pins? URL: http://digital.ni.com/public.nsf/allkb/8A85E97855EDADC98625730C00065F58

怎么才能够在LabVIEW下路由计数器的输出 我想要将一个计数器的输出路由至同一块板卡上的另一个计数器的source/gate端或者到一个特定的PFI引脚上。我能否不通过外部连接着两个引脚而实现这样的功能？ URL: http://digital.ni.com/public.nsf/allkb/C49A281133F4D39F862573C900442CDE

Do I Need to Manually Set the Range on my DAQ Device When Using TEDS Sensors? When using a TEDS device with either a real TEDS sensor a virtual TEDS file, do I need to set the range of the DAQ input task to optimize my resolution? URL: http://digital.ni.com/public.nsf/allkb/F902F12F97D0F9F7862573000081B9BC

カウンタを使って外部からのパルスを分周する方法 カウンタを使って外部からのパルスを分周しようとしています。 どのようにしたらいいですか？ URL: http://digital.ni.com/public.nsf/allkb/7026CEFCF1A881F0862572AD00263588

Can I Use an Analog Input for a Count Edges or Encoder Task Using DAQmx? I need to create a count edges or an encoder task but I do not have any available counters. Can I use an analog input (or resolver signal) to create a task for counting edges or for reading an encoder? URL: http://digital.ni.com/public.nsf/allkb/B472ABA1362F44328625729C0041A8B1

LabWindows/CVI で作成したDLL をTestStand からコールする方法 LabWindows/CVI で作成したDLL をTestStand からコールさせたいのですが、簡単なサンプルや手順書などはありませんでしょうか。 URL: http://digital.ni.com/public.nsf/allkb/2AFD55BB62C6266E86257273002B6BE0

How do I Specify my PFI Line as an External Clock Using Traditional NI-DAQ (Legacy) in LabWindows/CVI? I am using LabWindows/CVI to specify an external clock on a PFI line using Traditonal NI-DAQ. In LabVIEW I can use the AI Clock Config to specify a PFI line as an external clock but how do I achieve this in LabWindows/CVI? URL: http://digital.ni.com/public.nsf/allkb/6A93C0BC4122DE10862572680007E5D1