Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

在CAN总线上进行大量信息传输时有消息有延时 在CAN总线上传输信息比较少时，我传输的消息没有问题，但是一旦传输的消息比较多时，我就看到有延时。为什么会这样？ URL: http://digital.ni.com/public.nsf/allkb/E8EA69645B0554DE482571BF0010F13B

Can I Communicate With My Vector CAN Board Using the NI-CAN API in LabVIEW? I have a Vector CAN board, and I want to communicate with it using the NI-CAN API in LabVIEW. How can I do this? URL: http://digital.ni.com/public.nsf/allkb/F198B41B352EDD4C86257189007800D0

Finding the Message a CAN Channel Belongs to Using GetNames.vi How Do I Find Out What Message my CAN Channel Belongs to When I use the GetNames VI in LabVIEW? URL: http://digital.ni.com/public.nsf/allkb/C0304992682E1B8086257189007A87C0

Vector CAN 보드를 LabVIEW의 NI-CAN API를 사용하여 통신할수 있습니까? Vector CAN 보드를 가지고 있고 LabVIEW의 NI-CAN API를 사용하여 통신하고 싶습니다. 어떻게 하면 할수 있습니까? URL: http://digital.ni.com/public.nsf/allkb/DF7340C9F027BE448625719A0003D2FD

Message Delays on CAN Bus with High Bus Traffic When the CAN bus traffic is low, my messages transmit perfectly, but when the bus traffic becomes high, I start seeing delays. Why is this happening? URL: http://digital.ni.com/public.nsf/allkb/4659C4A3BB382E778625716600572EF5

Can I Set a Buffer Size For My Reads and Writes Using NI-CAN? Problem: Can I set a buffer size for my CAN reads and writes using NI-CAN? Solution: If you are using the channel API, you can't set the buffer size for CAN reads because all memory management for the channel API is done by the system RAM. URL: http://digital.ni.com/public.nsf/allkb/A0D719ABE36DD0E78625715E0012A079

NI-DNET with Group 2 (M/S) and Group 3 (UCMM) Messaging Does NI-DNET support Group 2 (Master/Slave) and Group 3 messaging (UCMM)? URL: http://digital.ni.com/public.nsf/allkb/75F5BB08925827698625715D00512609

How do I Read All Available Samples in the CAN Buffer? How do I read all available samples in the CAN buffer using the CAN Read VI? URL: http://digital.ni.com/public.nsf/allkb/C7B048CD2501EF5A86257157005D6126

Can I Programmatically Change the Baud Rate of My DeviceNet Device? I want to change the Baud Rate of my DeviceNet device programmatically. How can I do this? URL: http://digital.ni.com/public.nsf/allkb/491579A031A894448625715100410A46

DeviceNet 장비의 Baud Rate를 프로그램적으로 바꿀수 있습니까? DeviceNet 장비의 Baud Rate를 프로그램적으로 바꾸고 싶습니다. 어떻게 하면 이렇게 할수 있습니까? URL: http://digital.ni.com/public.nsf/allkb/C9A33E95A963BF15862571540015B150