Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Why is the Scaling I Enabled in MAX Not Working on an Embedded FieldPoint Application? I enabled scaling in Measurement & Automation Explorer under Data Neighborhood»FieldPoint Items»FP@xx_xx_xx_xx»cFP-xx-xxx»Channel 0 with the Scales Tab at the bottom. When I select the cFP Input Module under Data Neighborhood and click on URL: http://digital.ni.com/public.nsf/allkb/5E09B32D9E5BA841862572C3007DB62E

FTP Transfer of Files Between Host and Real-Time Targets in MAX How do I use FTP to transfer files between my host machine and a Real-Time target using Measurement and Automation Explorer (MAX)? URL: http://digital.ni.com/public.nsf/allkb/571113C2CE05998E862574E8006005A2

FTP Transfer of Files Between Host and Real-Time Targets in MAX How do I use FTP to transfer files between my host machine and a Real-Time target using Measurement and Automation Explorer (MAX)? URL: http://digital.ni.com/public.nsf/allkb/4DCF9D581C491E9F8625711B005FA539

在MAX中通过FTP在主机和Real-Time设备间传输文件 使用Measurement and Automation Explorer (MAX)如何在主机和Real-Time设备间传递文件? URL: http://digital.ni.com/public.nsf/allkb/79128CA06DDE044C862573A6004B3BC5

於MAX中利用FTP在Host Machine及Rea-Time target間傳送檔案 我要如何於MAX中利用FTP在Host Machine及Rea-Time target間傳送檔案？ URL: http://digital.ni.com/public.nsf/allkb/3081FB662FB0B96F86257436000DF8E2

Why Can't I Embed on my FieldPoint Controller? I am having trouble running my LabVIEW program on my FieldPoint controller. The program works fine when I am running LabVIEW for Windows, but when I target LabVIEW to my controller, or I try to embed it using the Application Builder, I get error messages such as 'Failed to download VI' or URL: http://digital.ni.com/public.nsf/allkb/72B59881ED73090A8625700C0055F230

FieldPoint 컨트롤러에 실행파일을 넣으면 파일 입출력이 되지 않는 이유는 무엇입니까? FieldPoint 컨트롤러를 타겟으로 정하면 파일 입출력이 잘 됩니다. 이 VI를 실행파일로 만들고 FieldPoint 컨트롤러에 EXE로 심으면 (예를 들어, 시작 실행), 파일 입출력이 되지 않습니다. 무엇이 잘못되었습니까? URL: http://digital.ni.com/public.nsf/allkb/16232E2DEF17B5FA8625722500294148

Why Can't I Read/Write Files When I Put My Executable on my FieldPoint Controller? When I choose my FieldPoint controller as my execution target, I can successfully read and write files. When I build my VI into an executable and put the EXE on the FieldPoint controller (e.g., a startup executable), I cannot read or write files. What am I doing wrong? URL: http://digital.ni.com/public.nsf/allkb/E36814C8E1B1609786256FC80064A594

なぜVIを実行形式にするとファイルのRead/Writeができないのでしょうか FieldPointを使用しています。実行ターゲットとしてFieldPointを選んだときは、ファイルのReadとWriteは行えました。しかし、VIを実行形式にビルドし、EXEをFieldPointコントローラに移動（例えば、スタートアップEXEとして設定）した場合は、ファイルのReadもWriteも URL: http://digital.ni.com/public.nsf/allkb/2A1CB245A97AEC3B8625702F0027FD40

What Are the Set Attributes Setting Codes for the FP-AI-112? I would like to programmatically set the range of a FP-AI-112. Since I am using a FP-1000/1001, the Set Attributes Optomux command (pg 5-9 FP-1000/1001 Programmer Manual) is the way to do this; however, the latest version of this manual is March 1999 and the FP-AI-112 is not listed. I need the URL: http://digital.ni.com/public.nsf/allkb/CCCE9A4111709D0486256FC0006C6CC6