Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

How to Map Triggers Using VXI-MXI-2 and NI-VXI 3.0, 3.1, or 3.2 I have noticed that TTL triggers map differently in NI-VXI 3.x than NI-VXI 2.x when using VXI-MXI-2 extenders. How do I map triggers using VXI-MXI-2 and NI-VXI 3.x? URL: http://digital.ni.com/public.nsf/allkb/335C6D5510BE3B6B86256E8E0023936D

Using a Third Party IEEE 1394 Host Adapter with the VXI-1394 Interface in Windows 2000 I have problems with my VXI-1394 hardware in Windows 2000, because I am using an IEEE 1394 host adapter other than the one that shipped with the VXI-1394 interface. URL: http://digital.ni.com/public.nsf/allkb/BEA9DEF090B42856862569D100709771

How Do I Make My PXI or VXI Controller Boot From a Floppy Disk? I want my PXI or VXI controller to boot from the floppy into the A: prompt to restore the operating system, but it always tries to boot from the hard drive first. What do I need to change?Or, I want my RT Series PXI controller to boot into the Real-Time Operating System URL: http://digital.ni.com/public.nsf/allkb/368A899A0626525E862568D2007F4515

どのようにしてPXI、VXIコントローラをフロッピードライブから起動することができますか？ PXI、VXIコントローラをA:ドライブにあるフロッピーから起動し、OSを再インストールしたいと思っていますが、常にHDDから起動してしまいます。どのようにしたらいいのでしょうか？ もしくは、RT PXI起動ディスクからPXIコントローラをRTとしたいと思ってい■> URL: http://digital.ni.com/public.nsf/allkb/03E45A999642D6A0862571250006F1F1

How Do I Use a National Instruments GPIB/VXI-C Controller with an HP-GPIB Board? How do I use a National Instruments GPIB/VXI-C Controller with an HP-GPIB board? URL: http://digital.ni.com/public.nsf/allkb/D60CCBC708501D68862568AA0070C8EA

How do I perform a double buffered acquisition from a VXI MIO board with a GPIB-VXI/C or VXI-1394 Controller? Niether the GPIB-VXI/C or VXI-1394 controllers support shared memory, which is required for performing a double buffered acquisition. URL: http://digital.ni.com/public.nsf/allkb/560C63F84B1340F386256823004F10AA

How to Install PCMCIA Drivers on VXIpc-800 Series Controllers with Windows 3.x How do I install PCMCIA drivers on VXIpc-800 series controllers with Windows 3.x? URL: http://digital.ni.com/public.nsf/allkb/1A9792304B17DA6B86256E8E00231DC2

Can I Use a Pre-written Script File of GPIB Commands in IBIC? I would like to use the Interactive Control (IBIC) to communicate with my instrument, but I would like to automate the process a little. Is there a way to use a script in IBIC, so that I don't have to type in everything over and over again? URL: http://digital.ni.com/public.nsf/allkb/CBF6B1EB7DA1A5348625664100758BAD

What Are the Supported Host Platforms for VxWorks on VXIpc Controllers? What are the supported host platforms for VxWorks on VXIpc controllers? URL: http://digital.ni.com/public.nsf/allkb/FB7F7D70638B03E2862566040059BFEA

Are there example programs of writing Code Instruments for the GPIB-VXI/C? Problem: Are there example programs of writing Code Instruments for the GPIB-VXI/C? Solution: Yes, National Instruments provides a disk of example programs showing how to write CIs for the GPIB-VXI/C. An updated version of these examples for the new version of the GPIB-VXI/C is attached below. URL: http://digital.ni.com/public.nsf/allkb/C6F2EAC97D918B9B86256E8E00231B28