My VXI-834x (VXI-MXI-3) System Shows Up As a PXI Chassis in Measurement & Automation Explorer
I am using Measurement & Automation Explorer (MAX) 3.0 and a VXI-8340 or VXI-8345 to interface to a VXI system. Under my PXI system in MAX, my VXI board shows up as a PXI chassis. How do I prevent this?
URL: http://digital.ni.com/public.nsf/allkb/32AC37D0919324C686256D0B00682FDD
|
How Do I Use the Speker Output on a VXI Embedded Controller?
The last several models of VXIpc embedded controllers released by National Instruments have included a sound output jack on the front panel, but when speakers are hooked up to this jack, the expected sound from the Windows OS or various music applications is not heard. What sound output can I
URL: http://digital.ni.com/public.nsf/allkb/BB20332BA19D935586256CCC005FE05D
|
How to Support Multiple AT-GPIB Controllers On a VXIpc with VxWorks Installed
How do I modify the software provided for my VXIpc controller running VxWorks to support multiple AT-GPIB controllers?
URL: http://digital.ni.com/public.nsf/allkb/E43C7AD47A4160EB86256CBF00733EB5
|
I am looking for information about special considerations or limitations of the VXI-DIO-128. Where can I find such information?
I am in the beginning of developing an application that will use the VXI-DIO-128 and I would like to get started on the correct path. Where can I find information about the limitations or other special issues of the VXI-DIO-128?
URL: http://digital.ni.com/public.nsf/allkb/CC21461F6640F9D486256CBF005FABB6
|
Where can I find information about register level programming the VXI-DIO-128?
I will be writing an application using the VXI-DIO-128 that cannot use NI-DAQ and need any information available that will aid me in register level programming.
URL: http://digital.ni.com/public.nsf/allkb/09B6F89EAD9FEEC286256CBE0056287B
|
DOS Ethernet Drivers for the PXI-815xB and PXI-815x, VXI-850, VXI-860 and VXI-7xx Series Controllers (SMC 9000 Ethernet Adapter)
I need to install an Operating System in my PXI-815xB or PXI-815x different than the one it shipped with, or I do not have an IMAGES folder in my controller and I need to reinstall the Operating System. How can I make a boot floppy with the DOS ethernet driver for the ethernet adapter of the
URL: http://digital.ni.com/public.nsf/allkb/BACFA238686499AD86256BF400499FB1
|
How Does the VXI Resource Manager Use the MODID Lines to Perform Slot Detection of Statically Configured VXI Devices?
I built my own VXI card. When I put it in my VXI chassis, Resource Manager (Resman) returns errors about conflicting devices in conflicting slots. How does Resman detect which cards are in which slots?
URL: http://digital.ni.com/public.nsf/allkb/721889B99EF1891086256B90006D6543
|
How Do I Configure A VXIpc 800/700 Controller As A Non-Slot 0 Controller?
I want to use my VXI-MXI-2 as my Slot 0 controller and I would like to use my VXIpc 800/700 as a Non-Slot 0 device, Non-Resource Manager. How do I configure the VXIpc 800/700 in hardware and software to accomplish this?
URL: http://digital.ni.com/public.nsf/allkb/DFBF808C98C41CFE86256B870061069D
|
How Do I Setup a Multiple Chassis VXI System with a GPIB-VXI/C?
How do I setup a multiple chassis VXI system using a GPIB-VXI/C interface? The system consists of two chassis, each containing a GPIB-VXI/C card, each of which are cabled to the same GPIB board.
URL: http://digital.ni.com/public.nsf/allkb/AD5644FC5510E53086256B170074F5BB
|
How to Map Triggers Using VXI-MXI-2 and NI-VXI 3.0, 3.1, or 3.2
I have noticed that TTL triggers map differently in NI-VXI 3.x than NI-VXI 2.x when using VXI-MXI-2 extenders. How do I map triggers using VXI-MXI-2 and NI-VXI 3.x?
URL: http://digital.ni.com/public.nsf/allkb/335C6D5510BE3B6B86256E8E0023936D
|
