Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Why Does the Test Panel for My SCXI Module Seem So Slow? I am trying to test an SCXI module, such as the SCXI-1531, in a MAX test panel. but it seems to read very slowly. Why is this occurring? URL: http://digital.ni.com/public.nsf/allkb/ABD1791C417660A786256DB70050FBCB

What Precision Are the Coefficients for a Custom Polynomial Scale in Traditional NI-DAQ? I created a custom polynomial scale in Measurement & Automation Explorer (MAX), yet MAX shows only four digits of precision. How many digits are used by the polynomial scale? URL: http://digital.ni.com/public.nsf/allkb/A122F53005D555EA86256D910078EFFA

BNC-2110の端子台を671xと673x型のアナログ出力デバイスと組み合わせて使用することに関して。 671xあるいは673x型のアナログ出力デバイスにBNC-2110端子台を使用したい場合、Measurement & Automation Explorer (MAX)の設定画面で、BNC-2110はアクセサリの一覧に出てきません。どうしたらよいでしょうか？ URL: http://digital.ni.com/public.nsf/allkb/5227C69E6521E7FF862570DC001F190D

Using the BNC-2110 with 671x and 673x Analog Output Devices When I try to configure my 671x or 673x analog output device to use the BNC-2110 as an accessory, Measurement & Automation Explorer (MAX) does not list the BNC-2110 as an option. What should I do? URL: http://digital.ni.com/public.nsf/allkb/5E5DFEF10C256A1A86256D7F0063CD92

The PXI System Tree in MAX Does Not List All of My PXI Controllers, Chassis or Devices After Upgrading a Driver I am using Windows 2000 on a PXI controller or a PC connected to a PXI system via MXI-3, and I am unable to properly configure my PXI system in Measurement and Automation Explorer (MAX). Also, I noticed that the PXI System worked correctly before I recently upgraded some driver versions.In URL: http://digital.ni.com/public.nsf/allkb/5978016FB696078C86256D6D007A93EE

How Can I Access the Second Drive on a NI Real-Time Controller Through Internet Explorer or MAX? How can I access the second drive on a NI Real-Time Controller Through Internet Explorer or MAX? URL: http://digital.ni.com/public.nsf/allkb/675E0CDABC62C1C486256D5E005770F8

How Do I Configure an Instrument to Communicate via TCP/IP in MAX? I have an instrument that can communicate via TCP/IP that I would like to configure in Measurement & Automation Explorer (MAX) and program with VISA. How do I add the device in MAX? URL: http://digital.ni.com/public.nsf/allkb/D7D8E3E1B682022286256D4A00771A52

¿Cómo configuro un instrumento para comunicación via TCP/IP en MAX? Tengo un instrumento capaz de comunicarse via TCP/IP que quisiera configurar en Measurement & Automation Explorer (MAX) y programar con VISA. ¿Cómo agrego el dispositivo en MAX? URL: http://digital.ni.com/public.nsf/allkb/E077BC784EE1854D862572D800001288

Measurement and Automation Explorer Does Not Auto-Discover my Real-Time System under Windows XP? I have a Real-Time controller that is placed on the same subnet as my host. I refresh Measurement and Automation Explorer (MAX) and view the Remote Systems tab, but no controllers are being discovered. What could cause this behavior? URL: http://digital.ni.com/public.nsf/allkb/86A5DB1A67D2D1B986256D18005BE87B

My VXI-834x (VXI-MXI-3) System Shows Up As a PXI Chassis in Measurement & Automation Explorer I am using Measurement & Automation Explorer (MAX) 3.0 and a VXI-8340 or VXI-8345 to interface to a VXI system. Under my PXI system in MAX, my VXI board shows up as a PXI chassis. How do I prevent this? URL: http://digital.ni.com/public.nsf/allkb/32AC37D0919324C686256D0B00682FDD