Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Configuration and Test of Excitation Voltages Using the SCXI 1520 in Traditional NI-DAQ I am using Traditional NI-DAQ and I am trying to test the excitation voltage on my SCXI 1520. How do I do this? URL: http://digital.ni.com/public.nsf/allkb/A25D6861433179F3862570F8005BBAE4

Why Is My SCXI Module Not Selectable In Calibration Executive? I am trying to calibrate an SCXI module in Calibration Executive. I have configured the Calibration Procedure in the setup wizard, and when I try to choose the module while setting up the Device Identifier, I cannot select it in the drop-down box. I have set up my DAQ card and SCXI chassis in MAX. URL: http://digital.ni.com/public.nsf/allkb/D98BF27357A11BEE862570E50061EF98

SCXI-1102/B/Cに内蔵されているローパスフィルタを使わないようにすることはできますか？ SCXI-1102を使って、矩形波（方形波）を集録しようとしたら、波形がくずれて三角波のようになってしまいます。矩形波の周波数を低くしても正しく集録できません。SCXI-1102には2Hzのローパスフィルタが入っているので、このフィルタによって高い周波 URL: http://digital.ni.com/public.nsf/allkb/9E529028828AB42D862570CA002A6149

Cascading the BNC-2096 with an SCXI Chassis I have a BNC-2096 (TEDS) and I want to cascade it with my SCXI Chassis. Is this even possible? URL: http://digital.ni.com/public.nsf/allkb/6FFB694280AEB9B38625709000822D40

Setting the Auto Zero Mode of an SCXI Module in Traditional DAQ I am trying to set the auto zero mode of my SCXI module in Measurement and Automation Explorer, but cannot find this setting. I am able to find the setting for my global channel in MAX when using DAQmx, but how do I set this up when using Traditional DAQ? URL: http://digital.ni.com/public.nsf/allkb/7BB1BC2ECFE788698625705800031A6A

Can the Attenuation for the SCXI-1313 be Set Programmatically? NI-DAQmx also provides a way to set the attenuation programmatically by using the Attenuation property of the DAQmx channel property node. Traditional NI-DAQ - No. URL: http://digital.ni.com/public.nsf/allkb/B138E2AA836B5354862570380073EA60

Why Are My SCXI Modules Recognized As Incorrect Devices in my Daisy-Chained System? I am using a multi-chassis SCXI system and some modules in one chassis in slots that are also filled in other chassis are recognized as unrelated modules of different types. Why is this? URL: http://digital.ni.com/public.nsf/allkb/90165525C229394D86257015007F8CF9

デイジーチェーンで構成されているシステムでは、SCXI-モジュールが違うデバイスとして認識されているのはなぜでしょうか。 マルチシャーシSCXIシステムでは各シャーシの同じスロットに同じモジュールが挿入された場合、無関係の別のモジュールとして認識されます。これはなぜでしょうか。 URL: http://digital.ni.com/public.nsf/allkb/1DEE9E0E6E47E153862571230049767F

How do I Create a Scale for the SCXI-1122 Module? I am trying to assign a custom scale to a NI-DAQ Virtual Channel for one of the channels on my SCXI-1122 module. When I right click on the Virtual Channel and select its Properties I am not given the option of setting a Scaling Formula. URL: http://digital.ni.com/public.nsf/allkb/C8E238B9DCE1A29486256FF70083AACF

SCXI-1122모듈에서 어떻게 Scale을 만들수 있습니까? 저는 SCXI-1122모듈의 채널중 하나에 NI-DAQ Virtual Channel을 만들어 Custom scale을 사용하려고 합니다. Virtual Channel에서 마우스 오른쪽버튼을 누르고 Properties를 선택하면 Scaling Formula 설정이 주어지지 않습니다. URL: http://digital.ni.com/public.nsf/allkb/91C00AF2954B602C862570030018EAA4