Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Why does the Auto-Detect Fail to Recognize my SCXI-1163R? I am controlling a SCXI chassis with an M-Series DAQ device. Currently I have the chassis properly configured in MAX with the appropriate communicating device selected and it auto-detects and recognizes all modules except my SCXI 1163R. I have ensured that all the jumpers are in their URL: http://digital.ni.com/public.nsf/allkb/ED9E094B7996D4A58625743300606C56

PXI-SCXI组合机箱的SCXI模块没有被自动选择 在我的组合机箱中，没有一个SCXI模块被自动选择好，甚至机箱已经上电并正确连接。如果我人为选择好模块，则没有一个模块能工作。如何解决这个问题？ URL: http://digital.ni.com/public.nsf/allkb/8F70A697373F966A4825739100134E26

在并行模式下，哪些数字线被SCXI保留了？ 我想使用DAQ板卡的数字和PFI线，而这块DAQ卡正连接到一个并行模式下的SCXI模块。在SCXI-1180穿通面板上可以做这个吗？ URL: http://digital.ni.com/public.nsf/allkb/80A07DF7FE4656494825739100105D7F

¿Qué determina si un Transductor es Activo o Pasivo? Se URL: http://digital.ni.com/public.nsf/allkb/413F24FE159630C4862573620011BAF6

The USB-1359 and Windows Vista 64 When I plug a USB-1359 into my Windows Vista 64 machine, a message pops up asking for the device's drivers. The operating system recognizes the device by name and asks for driver software for the NI-USB 1359. Can I use this device even though the readme does not list support for Vista URL: http://digital.ni.com/public.nsf/allkb/551569CAEE3A34488625729C00760E52

Why Do I Get Error -200077 When Trying to Configure My SCXI-1120/D? I have a SCXI-1120/D connected to an M-Series card. When I try to acquire data in a Measurement & Automation Explorer (MAX) Test Panel, I receive the following error: Error -200077 occurred at Test Panel Possible Reason(s): Requested value is not a supported URL: http://digital.ni.com/public.nsf/allkb/1EC380B82065EAC0862572730075415D

¿Por qué Obtengo el Error -200077 Cuando Intento Configurar mi SCXI-1120/D? URL: http://digital.ni.com/public.nsf/allkb/5145EAE90E246575862573840008BE2D

當我要設定SCXI-1120/D的時候，為什麼會得到錯誤碼-200077? 我的SCXI-1120/D 連到M系列的卡片。當我試著在自動檢測與設定軟體(MAX)的測試面板(Test Panel)抓取資料，我得到了以下的錯誤: URL: http://digital.ni.com/public.nsf/allkb/11C9A8455E8A5E188625735C0024A4BA

SCXI Modules Not Selected Automatically In PXI-SCXI Combo Chassis None of my SCXI modules are selected automatically in my combo chassis, even though the chassis is turned on and connected properly. If I select the module manually, none of the modules work. How can I solve this problem? URL: http://digital.ni.com/public.nsf/allkb/C56F7D3E11C546208625726100672CA2

配置一个 RS-232/RS-485 的 SCXI 系统 这个疑问解决向导的目的就是使您通过这个步骤来搭建和使用一个远程的 SCXI 系统。我们将进行必要的硬件连接和使用Measurement and Automation Explorer (MAX)来完成配置系统的必需的步骤。 URL: http://digital.ni.com/public.nsf/allkb/9A198084D2B1BDB5482572610032F9AA