Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

What is the Purpose of the 'Activate Additional Features' Button for Motion in MAX? I have installed NI-Motion 7.0 on my system and I have inserted my PCI 7344. I am exploring the different options and settings available to me in Measurement and Automation Explorer (MAX). When I select my motion controller and navigate through the General, Firmware, Onboard Memory Manager, and URL: http://digital.ni.com/public.nsf/allkb/67375B515E39D0F18625709F007A50EA

請問MAX中Motion的裝置下的'Activate Additional Features'按鈕是做什麼用的？ 我已在電腦上安裝NI-Motion 7.0並插入PCI-7344。我試圖探索Measurement and Automation Explorer (MAX)中不同的設定選項。當我選擇motion控制器並流覽其中General、Firmware、Onboard Memory Manager和Status 標籤時我注意到了視窗上方有個標示為'Activate Additional Features'的按鈕。請問這是做什麼 URL: http://digital.ni.com/public.nsf/allkb/7C5D5F20134F60908625714D00416E9E

Using the MID-765x Drive with Low Inductance Motors I have a motor with an inductance of less than 110 μH (microhenries). I would like to connect it to a MID-765x Drive. Is this possible? URL: http://digital.ni.com/public.nsf/allkb/2EAA91CB371582C38625708C005B7C00

What Motors will Work with the MID-76xx Drives? I am selecting motors for my MID-76xx Drive. What are the specifications the motor needs to meet? URL: http://digital.ni.com/public.nsf/allkb/421DCBF37C8334288625708C0073086B

Using Analog Encoders with NI Motion Controllers I have an analog encoder (or resolver) that outputs analog sine and cosine signals such as the Stegmann-Stick motor feedback system. I would like to use this as feedback in my servo motor setup. Can I use it with an NI Motion controller? URL: http://digital.ni.com/public.nsf/allkb/7E4613A20EC4A67086256F420000AAB8

請問在NI Motion卡如何使用類比Encoder? 我有一個類比的Encoder輸出正弦及餘弦訊號像Stegmann-Stick馬達回授系統，我想要在伺服馬達中回授，請問我能在NI Motion卡中使用嗎? URL: http://digital.ni.com/public.nsf/allkb/E8C5E589DE907C5486256F47001124B1

Problem Changing Settings for Two Motion Controller Boards in One System I have two similar motion control boards in one system, when I change the settings for one of the boards in Measurement and Automation Explorer and apply those settings the same settings for the other board are also changed. What is causing this to happen and what can I do to fix the problem? URL: http://digital.ni.com/public.nsf/allkb/3CB53E46DCBC1F0E86256F3500582F3B

Accessing General Purpose Digital I/O Lines of NuDrive with Motion Controller Board I would like to be able to use the eight general purpose digital i/o lines available on my NuDrive motor drive. How can I access those lines? URL: http://digital.ni.com/public.nsf/allkb/4D8548DF93CC698486256F030059608B

Removing Old Registry Entries for Hardware That Does Not Appear in the Windows 2000 Device Manager Device Manager displays only non-Plug and Play devices, drivers, and printers when you click the Show hidden devices command on the View menu to enable it. Devices that are installed but are not currently connected to the computer, such as a Universal Serial URL: http://digital.ni.com/public.nsf/allkb/EB620573B05B70DD86256E8E002519AD

How Do I Change the Board ID for My Motion Controller? My motion controller shows up in MAX as board ID 2. I would like to change the board ID to 1 to maintain compatibility with my deployed systems. URL: http://digital.ni.com/public.nsf/allkb/5CF27C3D32B0535386256BD5006A6357