Cart
|
Help
NI Home
>
Support
> KnowledgeBase
KnowledgeBase
Select your country
Category(s) Selected
[
start over
]
Question Type
: Install/Config [
remove
] ,
Hardware
: Motion Control [
remove
] ,
11-20 of
39
KnowledgeBase [
see results below
]. To refine your results, select another category.
Hardware
Controllers
(29)
Power Drives
(6)
Document Languages
English
(21)
French
(1)
Japanese
(3)
Chinese (Simplified)
(7)
Chinese (Traditional)
(6)
Korean
(1)
Search KnowledgeBase Documents:
Sort by:
Date (Most recent)
Title (A-Z)
11-20 of
39
Previous
|
Next
读取UMI-7764/7774上的Inhibit All的状态
我能够读取连接NI-Motion卡的UMI-7764或UMI-7774上的Inhibit All信号的状态吗?
URL:
http://digital.ni.com/public.nsf/allkb/451BEEEC6A1857FD86257240003C5416
Using a Non-7390 Motion Controller with a P-Command Drive
I have my 7330/7340/7350 motion controller configured in MAX in closed loop stepper mode and it is connected to a p-command drive. Every time I do a move, the encoder feedback always shows that the motor is a few counts off.
URL:
http://digital.ni.com/public.nsf/allkb/3003271B3C6095438625720B0081BDFE
使用非7390系列的運動控制器來搭配P-Command馬達驅動器
我有7330/7340/7350系列的運動控制器,在MAX下設定成閉迴路步進模式(closed loop stepper mode),然後連接至p-command的馬達驅動器。每次我完成一個運動,編碼器的回饋顯示馬達偏離我所設定的目標位置。
URL:
http://digital.ni.com/public.nsf/allkb/BA90C6433A131D0D8625739F001B1EDC
在P-command Drive上使用非7390的运动控制卡
我的7330/7340/7350运动控制卡,在MAX中配置闭环步进模式,它连接到了一个P-Command驱动器。每次运动时,编码器反馈都会显示电机偏离了一点位置
URL:
http://digital.ni.com/public.nsf/allkb/44AAD965CC678E778625740000186901
用同一个运动控制板卡同时控制步进电机和伺服电机
我正在使用PCI-7354四轴运动控制板卡,并且我想用它来同时控制伺服电机和步进电机。 我可以用这张板卡同时分别通过MID-7602和MID-7652驱动器来控制伺服电机和步进电机么?
URL:
http://digital.ni.com/public.nsf/allkb/A43E52A42BFA882B48257205000233D6
Using Stepper and Servo Motor Drives Together with One Motion Controller
I am using a PCI-7354 four axis motion controller, and I want to control both servo and stepper motors with it at the same time. Is there a way to use National Instruments stepper and servo drives such as the MID-7602 and MID-7652 together with this motion controller card?
URL:
http://digital.ni.com/public.nsf/allkb/6EE79E2C7BC88E31862571E8005A540B
在一張馬達卡上同時使用伺服跟步進馬達控制器
我使用PCI-7354四軸馬達控制卡,而且我想要同時控制伺服跟步進馬達。有任何的方法我可以使用這張馬達控制卡來同時控制NI的伺服跟步進馬達驅動器(例如MID-7602 和 MID-7652 )嗎?
URL:
http://digital.ni.com/public.nsf/allkb/B65A595F44F13EB0862574440024FA63
Reading the UMI-7764/7774’s Inhibit All Line Status
Can I read the UMI-7764 or UMI-7774’s Inhibit All input line status with NI-Motion?
URL:
http://digital.ni.com/public.nsf/allkb/F09914A1561EFBC5862571CC006D7521
讀取UMI-7764/7774的Inhibit All Line的狀態
我可以使用NI-Motion讀取在UMI-7764或UMI-7774上的Inhibit All input line的狀態嗎?
URL:
http://digital.ni.com/public.nsf/allkb/E12496F118D1A7678625740C0006C096
Longueur de câble maximum pour le matériel NI-Motion.
Quelle est la longueur maximum de câble que l’on peut utiliser entre la carte NI-Motion et l’interface de commande NI(UMI), et entre l’UMI et l’unité de puissance pour moteur NI ?
URL:
http://digital.ni.com/public.nsf/allkb/668E02A93E7D34E686257186002961A1
Sort by:
Date (Most recent)
Title (A-Z)
11-20 of
39
Previous
|
Next
Search KnowledgeBase Documents: