Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

我要如何將任務(Task), 虛擬通道(Vritual Channel), 定義比例(Custom Scales)移到另一台電腦上? 我想將已經建好給LabVIEW使用的任務(Task)、 虛擬通道(Vritual Channel)、 定義比例(Custom Scales)移到另一台電腦上。有什麼比較容易的方法可以將他們移到另一台電腦上嗎？ URL: http://digital.ni.com/public.nsf/allkb/D46790F73A747945862573E00035ADCB

DAQ Board Installation in the Mac OS Click on "Run Test Panels" to perform simple input/output operations on various channels of your board. Note: When you write your code using application software and you get bad readings or unexpected values, always run the NI-DAQ Test Panels mentioned in the previous step. URL: http://digital.ni.com/public.nsf/allkb/6BD50A75D24EB992862571D8006735B2

DAQCard Installation under Windows NT Using the Native Windows NT Socket Driver How do I install my PCMCIA DAQ board on Windows NT using the Native Windows NT Socket Driver? URL: http://digital.ni.com/public.nsf/allkb/8B9D95BA239F6392862571D4004954C0

PCMCIA Installation in Windows NT These third party socket drivers overcome limitations of the standard Windows NT PCMCIA driver. For example the Windows NT socket driver (pcmcia.sys) does not provide dynamic resource allocation and "Hot Insertion" of PCMCIA cards. (Insertion while the PC is running). URL: http://digital.ni.com/public.nsf/allkb/AAA8C49749C56821862571D4004CE541

在Windows NT中安装PCMCIA 注意：所有的NI-DAQ 6.9.2之前的版本都是为本土化windows NT套接字驱动程序而写得。6.9.2版本已经被测试过了，并且支持与Card Wizard 5.10.x一起使用。 为了安装程序，请选择你将要使用的套接字驱动程序。 URL: http://digital.ni.com/public.nsf/allkb/ACF55D24C802EA66862573AC0031F9C9

PCMCIA Installation in Windows NT Using the Card Wizard 5.10.x Socket Driver How do I install a PCMCIA DAQ board in Windows NT using the Card Wizard 5.10.x Socket Driver? URL: http://digital.ni.com/public.nsf/allkb/1B390290BF0881CD862571D3006EF577

Compatible DAQmx Versions for the USB 6251 and 6259 I just got a new M-Series USB device, the USB 6251 (or USB 6259). I already have DAQmx 8.0, but when I plug it in, Windows cannot find the driver for it and it doesn't show up in Measurement and Automation Explorer. What am I doing wrong? URL: http://digital.ni.com/public.nsf/allkb/B6771D21C6B1964B862571CE0058D6DC

与USB 6251和USB 6259兼容的DAQmx版本 我刚刚得到一块新的M系列的USB设备，USB 6251（或者USB 6259）。我已经有了DAQmx 8.0，但是当我把它插上时，Windows没有找到它的驱动并且它没能显示在Measurement and Automation Explorer里。我哪里操作有误？ URL: http://digital.ni.com/public.nsf/allkb/52D7C8F4E13EB106862574B10040DD45

我如何配置NI USB-6009/6501的数字操作为Open-Drain或Push-Pull？ 我有一块NI USB-6009/6501，我从手册中读到可以配置DIO线为Open-Drain (+5V 操作) 或 Push-Pull (+3.3V 操作)。我如何才能办到？ URL: http://digital.ni.com/public.nsf/allkb/CF8BAA0B4718D213482571CE0031D335

My NI SCC-68 Does Not Appear in NI-DAQmx Devices in MAX Refer to the NI-DAQmx Readme for a list of supported devices. I have an NI SCC-68 that I want to configure in Measurement & Automation Explorer (MAX) with NI-DAQmx 8.0. When I attempt to add the NI SCC-68 as a new NI-DAQmx device, it is not available, but the NI SCC-2345 and and the URL: http://digital.ni.com/public.nsf/allkb/16B42C3FD44090D4862571BC0069422B