Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

PCI-7041 RT Not Found in MAX I am unable to find my PCI-7041 RT in Measurement & Automation Explorer (MAX). What could be some possible reasons for this? URL: http://digital.ni.com/public.nsf/allkb/9F8A8CE97ABF82CC8625742B0048BEDA

How to Build a Current Loop System with Isolated M Series? I want to build a 4 - 20 mA current loop system with Isolated M Series Device. Which module should I use and configurations are possible? URL: http://digital.ni.com/public.nsf/allkb/28DEBF6F355C828E862573F70003B5BC

What Options Do I Have for Hardware-Timed Digital I/O on my M Series DAQ Device? I am using an M Series Multifunction DAQ device to acquire or generate digital signals. I know that my device does not have an onboard timing engine for digital I/O. Therefore, I will have to use some other clock source to time the URL: http://digital.ni.com/public.nsf/allkb/51754212AD10BDCE862573BD007BFDD2

为什么我的USB数据采集模块出现“Unable to Loacate a Driver”错误？ 我刚刚购买了一个USB数据采集模块（9211或9215），并在Windows系统的计算机上安装了NI-DAQmx。当我插入我的USB模块时，我得到一个错误：“Windows was unable to locate a driver for this device.”该如何出来？ URL: http://digital.ni.com/public.nsf/allkb/01F862902AA81CE6482573A200098B96

PFI lines of a PCI-6232 for quadrature encoder measurements How can I connect a quadrature encoder to a PCI-6232 with a CB-37-HVD connector block? URL: http://digital.ni.com/public.nsf/allkb/79C0136B7DAFE01E86257323005A58C5

DAQの同期プログラムでエラー-89140などが発生してしまいますが、どうすれば回避できるのでしょうか？ PXIシステムを使用しています。DAQの同期を行うプログラムを実行しようとすると、エラー-89140などの、経路関連のエラーが発生してしまいます。過去には問題なく実行できていました。どうすれば回避できるのでしょうか？ URL: http://digital.ni.com/public.nsf/allkb/F4987B403CC3A56C862572EF00297CC6

Firmware Incompatability With Different Versions of DAQmx Base. Firmware incompatability can cause the following problems: The lsdaq utility is telling me the device firmware on my USB-6008, USB-6009 or USB-6501 is incompatable. How do I fix this? I upgraded my NI DAQmx Base from version 2.2 or earlier to 3.0 or later. My URL: http://digital.ni.com/public.nsf/allkb/91CBCFE9E171C845862572CF0077D8F9

Why do I Get Error -201028 When I import My Measurement and Automation Explorer (MAX) Configuration to a Simulated Device? When I try to export my configuration from one machine and import it to another using a simulated device, I get an import report similar to the following: NI-DAQmx 8.5:-201028Measurements: Name specified is already in use. Specify a URL: http://digital.ni.com/public.nsf/allkb/3DE2A749C5F37667862572BA0061DDE1

在NI-DAQmx和NI-DAQmx Base間切換USB-6008, 6009, 或 6501的驅動程式 我有一個 URL: http://digital.ni.com/public.nsf/allkb/D2B193EDF137DB6C8625731400081D14

在NI-DAQmx和NI-DAQmx Base间切换USB-6008, 6009, 或 6501的驱动程序 我有一个USB-6008设备，我想在NI-DAQmx和NI-DAQmx Base间切换它的驱动程序，我该怎么做呢？ URL: http://digital.ni.com/public.nsf/allkb/59EE91A53A913C63482572940013D47B