Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

GPIB Plug and Play Board Undetected by Windows 98/95/Me My GPIB plug and play board is not being detected by my Windows 98/95/Me system. What can I do to fix this? URL: http://digital.ni.com/public.nsf/allkb/5D1016E51FEB9F48862571EA0005B9F6

GPIB-ENET Installation and Configuration under Windows NT You are now ready to connect instruments to the GPIB-ENET and communicate with them. See the Introduction to the Interactive Control (IBIC) page for more information. URL: http://digital.ni.com/public.nsf/allkb/835DA82E6E5E0671862571E90067929C

Installing GPIB Driver Software in Windows NT Problem: How do I install my GPIB driver software on Windows NT? Solution: First determine Available Hardware Resources on Windows NT. The hardware resources that you will need to check are base I/O address, interrupt levels, and DMA (direct memory access) channels. URL: http://digital.ni.com/public.nsf/allkb/2130571698633729862571E9006708BC

Preparing Windows NT for Plug and Play Devices I have an ISA GPIB card that I am about to install. What do I need to do before I physically install the card? URL: http://digital.ni.com/public.nsf/allkb/E0345F62A211ABE1862571EA00032B44

Resolving Resource Conflicts in Windows 98/95 Problem: How can I resolve resource conflicts in Windows 95/98? Solution: In Windows 98/95, the Device Manager can be used to determine which devices and drivers are using resources. Under the Start Button » Settings » Control Panel. Double-click on System. Now click on the Device Manager Tab. URL: http://digital.ni.com/public.nsf/allkb/A16B4A7BD925A33B862571E9005315E0

Using the GPIB Configuration Utility Problem: How do I use the GPIB configuration utility? Solution: This document describes the GPIB Configuration utility, an interactive utility you can use to configure the GPIB software. Overview The Windows 95 GPIB Configuration utility is integrated into the Windows 95 Device Manager. URL: http://digital.ni.com/public.nsf/allkb/61CA89E59F7E597C862571E90050195C

Resolving GPIB Resource Conflicts in Windows NT I am using a PCI GPIB board on Windows NT and am receiving a Resource Conflict. What can I do to troubleshoot this? URL: http://digital.ni.com/public.nsf/allkb/79A43DA2D4BE41E2862571DC0052E3EB

解决GPIB在Windows NT系统中资源冲突问题 我在Windows NT系统上使用一块PCI-GPIB板卡的时候出现了资源冲突。我如何能解决这个问题？ URL: http://digital.ni.com/public.nsf/allkb/6CDA2A81479773C38625734C0004ACD9

Plug and Play Board Undetected by Windows 2000 I have a plug and play GPIB board that I have installed in my Windows 2000 computer, but it is not being detected. What can I do to fix this? URL: http://digital.ni.com/public.nsf/allkb/33A6EC3456105B00862571D20069F06D

Resolving GPIB Resource Conflicts in Windows 2000 I have a GPIB board for my Windows 2000 operating system. How can I resolve resource conflicts with my board? URL: http://digital.ni.com/public.nsf/allkb/1BD739442895CCDA862571D200659740