Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Shared Variable and/or PNG Support Is Not Active After Rebooting the TPC-2006 I installed shared variable and PNG support for my TPC-2006 touch panel and both work. After rebooting, these features stop working and appear to have been uninstalled, and I have to reinstall support every time I reboot to get them working again. How can I force the TPC-2006 to keep shared URL: http://digital.ni.com/public.nsf/allkb/4B3034AE0478B1C68625721F002EF1F1

Steps for setting up the FPT-1015 What are the steps for setting up the FPT-1015? In addition to the fact that the manual for this product has a name which does not correspond to the production, it is not accurate in its installation instructions for the FPT-1015. URL: http://digital.ni.com/public.nsf/allkb/62ACC2410D070538862571420077429F

How Do I Configure the FTP Server on the TPC-2006/2012? How can I configure my NI TPC-2006 and TPC-2012 for file transfers using FTP? URL: http://digital.ni.com/public.nsf/allkb/23532363F4905EC28625727A00730B80

How do I Configure the FTP Server on TPC-2006 and TPC-2012 How can I configure my NI TPC-2006 and TPC 2012 for file transfers using FTP? URL: http://digital.ni.com/public.nsf/allkb/D1726990DCEB82E4862570F20069C57D

How Do I Disable Daylight Saving Time on LabVIEW Real-Time Targets? I have set the correct time zone on my LabVIEW Real-Time target through the Measurement and Automation Explorer, but I can't seem to disable the daylight saving feature. I would prefer that my controller didn't switch to daylight saving time in April, but it seems like every time zone will URL: http://digital.ni.com/public.nsf/allkb/2DA96C2456C7667B86256F90005E3049

LabVIEW Real-Timeターゲットのサマータイムを無効にする方法 Measurement & Automation Explorer (MAX)でLabVIEW Real-Timeターゲットのタイムゾーンを設定しました。しかし、サマータイムの機能を無効にすることができません。4月になるとサマータイムが自動的に有効になるようですが、LabVIEW Real-Timeターゲットのサマータイム■> URL: http://digital.ni.com/public.nsf/allkb/73875DD63871D8358625714D000F3478

How Do I Set Up a CAN Real-Time Application in MAX? I have a 2-port CAN module for my PXI chassis that is in Real-Time mode, how do I set this system up and download the channels to the target PXI system from my host computer? URL: http://digital.ni.com/public.nsf/allkb/D2D8B947369F453986256F89006F40B0

Is it Possible to Synchronize the Time-Stamps from Multiple PCI-CAN Cards through RTSI? I have multiple PCI-CAN cards in one computer. We also have multiple instances of an application running, one for each card. In order to correlate our data we need to know if it is possible to make it so the time stamps on the CAN frames do not drift. Is this possible? URL: http://digital.ni.com/public.nsf/allkb/625AF6B3B2A7B63686256F54006F205A

다수의 PCI-CAN카드들을 RTSI를 통하여 Time-Stamps를 동기화시키는 것이 가능합니까? 저는 하나의 컴퓨터에 다수의 PCI-CAN 카드를 가지고 있습니다. 또한 각각의 카드에 실행되는 다수의 어플리케이션을 가지고 있습니다. 측정된 데이터를 연관시키기 위해서는 CAN Frame에서의 Time-Stamps가 'drift'하지 않게 하는것이 가능한지 알아야 합니다. 이것이 가능 URL: http://digital.ni.com/public.nsf/allkb/7DA84022E9E669D18625700B00163724

Is it Possible to Use NI-CAN Channels on Third-Party CAN Hardware? I can't see my third-party CAN hardware in MAX and want to be able to use my NI-CAN channels. Is this possible? URL: http://digital.ni.com/public.nsf/allkb/E2C6ED025C798C5586256F4E00520448