Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

How Do I Add FieldPoint I/O Modules to an Existing Project? I have been developing a project in LabVIEW using FieldPoint, and I would like to add additional I/O modules to my hardware set up. How do I get these modules to appear in the Project Explorer window? URL: http://digital.ni.com/public.nsf/allkb/823ABB6F46415BCF862574790070F647

为何FieldPoint不能识别外部紧凑闪存卡？ 我试图通过增加一个外部紧凑闪存来扩展FieldPoint的存储容量。我从第三方买了一个新的闪存卡并安装好，但是FieldPoint不能识别。哪里出了问题？ URL: http://digital.ni.com/public.nsf/allkb/5E5DCC0C1A9DAB64482574010008E629

How to Build a Current Loop System with Compact FieldPoint? I want to build a 4 - 20 mA current loop system with Compact FieldPoint. Which module should I use and configurations are possible? URL: http://digital.ni.com/public.nsf/allkb/7BC3FBF060AB9D60862573F600786B71

How to Build a Current Loop System with CompactRIO? I want to build a 4 - 20 mA current loop system with CompactRIO (cRIO). Which module should I use and configurations are possible? URL: http://digital.ni.com/public.nsf/allkb/5A30CD178637BFA5862573F700003BAD

Configuring the NI MES-3980 IP Address and Accessing the Web Console I need to configure the NI MES-3980 for a static or dynamic IP address and then access the web browser to configure settings. How can I get this accomplished? URL: http://digital.ni.com/public.nsf/allkb/5983CCB59977B3DC862573D0006156D6

How Do I Install LabVIEW Real-Time 6.1.1 on my FieldPoint Controller I would like to install LabVIEW Real-Time 6.1.1 on my FieldPoint controller. How do I install this version of LabVIEW Real-Time from my host computer? URL: http://digital.ni.com/public.nsf/allkb/A80FB94C9C4FB401862573410064A073

Host 컴퓨터와 이더넷을 이용해 FieldPoint와 통신하기 FieldPoint 나 Compact FieldPoint 컨트롤러나 네트워크 모듈이 있는데 Measurement and Automation Explorer (MAX)상에서 보이지 않습니다. 어떻게 Host컴퓨터와 FieldPoint장치간 통신을 할 수가 있나요? URL: http://digital.ni.com/public.nsf/allkb/661431DCCED8C5A686257385002D9D21

How to Network FieldPoint to a Host Computer with Ethernet I have connected my FieldPoint or Compact FieldPoint controller or network module, but it does not appear in Measurement and Automation Explorer (MAX). How do I network my FieldPoint hardware to my host computer? URL: http://digital.ni.com/public.nsf/allkb/50BE7BEA4D5285DA862573370070D30B

What Software Needs to be Installed to Activate the FieldPoint Recommended Software Sets in MAX? I have installed the August 2007 Driver CD or later, and I would like to use the recommended software sets for FieldPoint, but they are disabled. What software do I need to install to activate these recommended software sets? URL: http://digital.ni.com/public.nsf/allkb/B4394A1AE038A5FF8625731B005FE34F

What is a Recommended Software Set? I installed the August 2007 Driver CD and the LabVIEW Real-Time Software Wizard has changed. I now have the option to install recommended software sets. What are they, and why are some of them disabled? How do I install a set of software that includes software that is not in one of URL: http://digital.ni.com/public.nsf/allkb/A0B2AEDA76A029DC8625731B0057A16E