Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

How Can I Manually Connect Newly Found Hardware to its Driver? The Found New Hardware Wizard comes up when my computer starts, but when I select the Install the software automatically option, the wizard seems to hang. The magnifying glass just keeps spinning. How do I connect the hardware to the driver? URL: http://digital.ni.com/public.nsf/allkb/F3A23D5DE721584D8625723E005F510A

我该如何将任务转移到另一台电脑上？ 我对特定的LabVIEW程序创建了的一些任务，虚拟通道和自定义的比例，并想将其转移到其他电脑上。我该怎样方便的实现这些转移？ URL: http://digital.ni.com/public.nsf/allkb/B19AF184D19804BB4825721E0033DD0D

How do I Transfer Tasks, Virtual Channels, and Custom Scales to Another Computer? I have created several tasks, virtual channels, and custom scales that are specific to a LabVIEW program that I would like to move to another computer. How can I easily transfer these things to the new computer? URL: http://digital.ni.com/public.nsf/allkb/42A2D212796B3DC2862571FF0061B402

我要如何將任務(Task), 虛擬通道(Vritual Channel), 定義比例(Custom Scales)移到另一台電腦上? 我想將已經建好給LabVIEW使用的任務(Task)、 虛擬通道(Vritual Channel)、 定義比例(Custom Scales)移到另一台電腦上。有什麼比較容易的方法可以將他們移到另一台電腦上嗎？ URL: http://digital.ni.com/public.nsf/allkb/D46790F73A747945862573E00035ADCB

DAQ Board Installation in the Mac OS Click on "Run Test Panels" to perform simple input/output operations on various channels of your board. Note: When you write your code using application software and you get bad readings or unexpected values, always run the NI-DAQ Test Panels mentioned in the previous step. URL: http://digital.ni.com/public.nsf/allkb/6BD50A75D24EB992862571D8006735B2

DAQCard Installation under Windows NT Using the Native Windows NT Socket Driver How do I install my PCMCIA DAQ board on Windows NT using the Native Windows NT Socket Driver? URL: http://digital.ni.com/public.nsf/allkb/8B9D95BA239F6392862571D4004954C0

PCMCIA Installation in Windows NT These third party socket drivers overcome limitations of the standard Windows NT PCMCIA driver. For example the Windows NT socket driver (pcmcia.sys) does not provide dynamic resource allocation and "Hot Insertion" of PCMCIA cards. (Insertion while the PC is running). URL: http://digital.ni.com/public.nsf/allkb/AAA8C49749C56821862571D4004CE541

在Windows NT中安装PCMCIA 注意：所有的NI-DAQ 6.9.2之前的版本都是为本土化windows NT套接字驱动程序而写得。6.9.2版本已经被测试过了，并且支持与Card Wizard 5.10.x一起使用。 为了安装程序，请选择你将要使用的套接字驱动程序。 URL: http://digital.ni.com/public.nsf/allkb/ACF55D24C802EA66862573AC0031F9C9

PCMCIA Installation in Windows NT Using the Card Wizard 5.10.x Socket Driver How do I install a PCMCIA DAQ board in Windows NT using the Card Wizard 5.10.x Socket Driver? URL: http://digital.ni.com/public.nsf/allkb/1B390290BF0881CD862571D3006EF577

Non-Plug and Play Data Acquisition Board Installation in Windows NT I have a Non-Plug and Play DAQ board that I need to install in Windows NT. Are there step-by-step instructions for doing this? URL: http://digital.ni.com/public.nsf/allkb/604DBC2832599676862571D2006381D6