Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Addressing VXI Devices Using the GPIB/VXI-C Problem: How do I address VXI devices using the GPIB/VXI-C? Solution: This document provides on overview of some of the features of the GPIB-VXI/C. The GPIB-VXI/C is a C-sized VXIbus module that links the industry standard IEEE-488 (GPIB) bus or RS-232 serial to the VXIbus. URL: http://digital.ni.com/public.nsf/allkb/18880DD40253C91A862571C200406F93

Installing the TCP/IP Network Protocol on Your Windows 95/98 PXI/VXI/VME Embedded Controller How do I install TCP/IP on Windows 95/98 on my PXI/VXI/VME embedded controller? URL: http://digital.ni.com/public.nsf/allkb/63D8C6CDB2BC4F91862571A400705468

Installing the TCP/IP Network Protocol on Your Windows NT PXI/VXI/VME Embedded Controller Problem: How do I install TCP/IP on Windows NT on my VXI/PXI controller? Solution: TCP/IP is one of the most common networking protocols in use and is required for telnet, ftp, web access, and a number of other networked operations. URL: http://digital.ni.com/public.nsf/allkb/AFA0276CBAF81785862571A40050661B

Configuring the VXIpc-870 Watchdog Timer What is a Watchdog Timer and how do I configure one for my VXIpc-870 controller? URL: http://digital.ni.com/public.nsf/allkb/DBC3F9BE8597B3268625719C008294D8

Setting Up HyperTerminal to Access the GPIB-VXI/C Problem: How do I set up the serial output on my GPIB-VXI/C? Solution: You can access the GPIB-VXI/C through the serial interface. In Windows 9x/NT/2000/XP, the easiest way is to use HyperTerminal (Start » Programs » Accessories » Communications » HyperTerminal). URL: http://digital.ni.com/public.nsf/allkb/E72458D6F8C7E7D28625719C006C9C45

VXIpc-870 and VXI/VMEpc-600 Series SCSI Installation How do I install SCSI support on my VXIpc-870 and VXI/VMEpc-600 Series controllers? URL: http://digital.ni.com/public.nsf/allkb/ACC8A5F2B7A7D6EF8625719C0080A615

Changing the Resman Delay of the GPIB-VXI/C Problem: How do I change the Resman delay of the GPIB-VXI/C? Solution: The GPIB-VXI/C is factory configured such that Resman will run immediately following bootup (usually about 2 seconds). URL: http://digital.ni.com/public.nsf/allkb/E15B8F14786C3CF7862571980001861B

Error Code 10 After Installing NI-VXI 3.3.1 NI-VXI 3.3.1 installs fine, but when I try to install my VXI hardware, I get error code 10. How can I remove this error? URL: http://digital.ni.com/public.nsf/allkb/D3B467F2AAF49050862571470042B38E

Unable to Run Resman After Changing the PCI-MXI-2 User Window Size I had a working MXI-VXI system and then I went to MAX and changed the User Window size for address mapping from 2 MB to 2 GB. After rebooting the computer, I can't run Resman anymore and received this error in Windows Device Manager:'This device cannot find enough free resources that it can URL: http://digital.ni.com/public.nsf/allkb/FA461403E17BA345862570590073AF1E

Does Boot Order Matter with MXI-3 For VXI Systems? I have a VXI-834x series controller that uses MXI-3 to connect to the PCI bus of my computer. Are there any considerations regarding the boot order? URL: http://digital.ni.com/public.nsf/allkb/A3FAFA9FBC666AC88625704600700B1D