Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

What Versions of Vision Builder for Automated Inspection and LabVIEW RT Can I Have on a CVS or Smart Camera at the Same Time? Which versions of Vision Builder for Automated Inspection (VBAI) and LabVIEW Real-Time will work together on a Compact Vision System (CVS) or Smart Camera? URL: http://digital.ni.com/public.nsf/allkb/01C1CC3AF27EEB35862570F8007139AF

哪幾版的VBAI和LabVIEW RT能夠同時在CVS上運行？ 在我的Compact Vision System (CVS)中，Vision Builder for Automated Inspection為2.6.1版，LabVIEW Real-Time的為7.1.1版。我試著把LabVIEW Real-Time升级到8.0版，卻得到如下的錯誤“Cannot process install because other dependencies are required: LabVIEW Real-Time 7.1.1.”我也嘗試在CVS上安装Vision Builder AI URL: http://digital.ni.com/public.nsf/allkb/529D6CF671DE223686257221000BC62D

PCI-1424 Fails Self Test After running a self test on my PCI-1424 frame grabber board, it fails with the following error message:Scarab Test Fails On-board memory logic active test: failure criticalDetails: Error, could not access IMAQ memory controller [x3,1] When trying to acquire an URL: http://digital.ni.com/public.nsf/allkb/C9F315EF82478A7A862570CF0075BCFF

Configuring the PCI-1410 With a Non-Standard Camera or Video Source How do I configre the PCI-1410 to acquire from a non-standard camera or video source? URL: http://digital.ni.com/public.nsf/allkb/53877005839C5EC6862570610071DFCF

How Can I Change the Size/Style of Text Overlays on the CVS? I am using a CVS to acquire high-resolution images (greater than 640x480). When I attempt to overlay custom text or the results of a Vision Builder for Automated Inspection (VBAI), the text appears, but it is too small to be read easily. What can be done to increase the size or change the style of URL: http://digital.ni.com/public.nsf/allkb/DBD01C52ABBDA09C86256FF20078DFFC

Increasing Maximum Number of Buffers For NI-IMAQ Devices In my program, I am using a ring acquisition. It appears as though I am limited to only 50 buffers (frames) worth of images. How can I remove this limitation? URL: http://digital.ni.com/public.nsf/allkb/4C8F8A4A542B93BB86256FA3006DDEA4

Does the PCI-1408 Work with Vision Assistant 7.1? My PCI-1408 is detected by Measurement and Automation Explorer, and I can Snap and Grab images. However, when I try to do the same using Vision Assistant 7.1, the program does not detect an installed camera. Is the PCI-1408 compatible with the Vision Assistant? URL: http://digital.ni.com/public.nsf/allkb/FBF210F9578CB10786256F9000489CF0

PCI-1408はVision Assistant 7.1で使用できますか？ PCI-1408は、Measurement and Automation Explorer(MAX)で認識されており、「Snap」も「Grab」も使用できます。しかし、Vision Assistant 7.1で使用しようとすると、カメラが認識されません。Vision Assistant 7.1でPCI-1408は使用できますか？ URL: http://digital.ni.com/public.nsf/allkb/20D2CE534AF514908625702800092559

Why Am I Not Acquiring Images at the Expected Frame Rate of My Camera? I can't acquire images at the full frame rate of my camera. What might be causing this? URL: http://digital.ni.com/public.nsf/allkb/96CB1A25EFF49A3C86256F80005B8EB1

Instalando LabVIEW Real-Time 7.1 y Vision Builder for Automated Inspection 2.0.x en el Sistema Compacto de Visión (CVS) Recientemente actualicé mi sistema de desarrollo para incluir LabVIEW 7.1, LabVIEW Real-Time 7.1, y el paquete Vision Builder for Automated Inspection (VBAI) 2.0.2. Tengo mi Sistema Compacto de Visión (CVS) el cual estoy utilizando para adquirir imágenes desde mi cámara FireWire y deseo utilizarlo URL: http://digital.ni.com/public.nsf/allkb/9BB1E38C052473D586256F350076DD1A