Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

多个NI硬件和软件产品的安装顺序 我已经购买了多个NI的硬件和软件产品。有什么特定的更好的安装软硬件的顺序吗？ URL: http://digital.ni.com/public.nsf/allkb/2804461C4BEABE81482571F400211010

安裝數個NI軟硬體產品的順序 我購買了數個NI軟硬體產品。請問這些NI的軟硬體是否有優先安裝順序？ URL: http://digital.ni.com/public.nsf/allkb/30D11883DD282B45862573F0001051E3

Connecting the DAQPad-6016 or 6015 with Calibration Executive I am trying to connect the DAQPad-6016/15 for Calibration Executive. What connections do I need to make? URL: http://digital.ni.com/public.nsf/allkb/0784B1B82E57A0CF86257141005EE97E

보정(Calibration)을 하기위한 DAQPad-6016의 연결. 저는 보정을 하기위해 DAQpad-6016을 연결하고자 합니다. 해야할 연결들이 무엇입니까? URL: http://digital.ni.com/public.nsf/allkb/95F85214B810839886257146001A0FD2

Upgrading to Calibration Executive 3.0/3.01/3.1 I want to upgrade from Calibration Executive 2.0 to Calibration Executive 3.0/3.01/3.1. What steps do I need to follow? URL: http://digital.ni.com/public.nsf/allkb/A9CEC67A85FC97E3862571220072F36B

Why Is My SCXI Module Not Selectable In Calibration Executive? I am trying to calibrate an SCXI module in Calibration Executive. I have configured the Calibration Procedure in the setup wizard, and when I try to choose the module while setting up the Device Identifier, I cannot select it in the drop-down box. I have set up my DAQ card and SCXI chassis in MAX. URL: http://digital.ni.com/public.nsf/allkb/D98BF27357A11BEE862570E50061EF98

Remove Procedures in Calibration Executive If a folder is removed, all the boards in that category will be removed from the procedure. Example: To remove all M-Series boards go to C:\Program Files\National Instruments\Calibration Executive\procedures and remove the MIO DAQmx folder. URL: http://digital.ni.com/public.nsf/allkb/3C231981DD0411808625704C006189EA

Calibration Executive 2.2.1 File Extractor May Cause New Procedures to Appear in the Calibration Executive Wizard I installed the Calibration Executive 2.2.1 file extractor and it caused new procedures to appear in the Calibration Executive Wizard. Why did this happen? URL: http://digital.ni.com/public.nsf/allkb/20C0C9781D37AECD86256EA6004D5A15

What IVI Drivers are Installed with Calibration Executive? I want to run Calibration Executive in automated mode and want to make sure that the IVI drivers for my external calibration hardware were installed with Calibration Executive. Which drivers are installed? URL: http://digital.ni.com/public.nsf/allkb/C533B27F38E28F6186256DEA00748CA6

The Calibration Executive Uninstaller Leaves Files on My Computer. I've noticed that the Calibration Executive uninstaller leaves files on my computer. Is this supposed to happen? URL: http://digital.ni.com/public.nsf/allkb/8AF093AD5AA90A2886256DE3005318FD