Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

How do I use 7.0 Measurement Studio assemblies after 7.1 has been installed? When I installed Measurement Studio 7.1, my 7.0 applications were upgraded to 7.1. Now, when I open an old project that was developed against 7.0 assemblies, I am developing against the new 7.1 assemblies instead of the old 7.0 assemblies. Can I still develop applications using the 7.0 assemblies, URL: http://digital.ni.com/public.nsf/allkb/7BC0B7E11F6018CB86256F000054A675

Compile Errors with Measurement Studio ActiveX Controls in Visual C++ I'm trying to use one of the Measurement Studio ActiveX User Interface controls in Microsoft Visual C++ (MFC). When attaching a member variable to the control, a wizard generates some wrapper code and then creates the member variable. However, when I attempt to compile, I receive the following URL: http://digital.ni.com/public.nsf/allkb/9FC4CBD02CB3D7FF86256EE40076B8D7

VC中使用Measurement Studio ActiveX 控件时产生的编译错误 在VC（MFC）中使用Measurement Studio ActiveX 用户控件，当为控件绑定一个成员变量时， 向导将生成一些封装代码并创建该变量，但是，编译的时候，会出现以下错误： c:\CtrlDialog4\graph.h(748): error C2061: syntax error : identifier 'CWAnnotation' c:\CtrlDialog4\graph.h(578): URL: http://digital.ni.com/public.nsf/allkb/52CE71BA5135BB13862574C80033E1F1

Creating an Error Log File for a Software Installation I am installing some National Instruments software and during the installation I receive an MSI error (or other installation error) and cannot install. How can I create an error log so that I can report the problem? URL: http://digital.ni.com/public.nsf/allkb/AB597E885DB7D16B86256E92006DB232

Visual Studio .NET 2003 Project VC++ Directory Settings Are Changed or Removed After Measurement Studio 7.0 is Installed After installing Measurement Studio 7.0, I get a lot of errors when compiling my Visual C++ projects. I am missing important Visual Studio .NET 2003 Project VC++ Directories. These directories are listed in Tools >> Options. How do I correct this and restore my standard directory URL: http://digital.ni.com/public.nsf/allkb/355DC207458355CD86256E52007C80E5

Installing Measurement Studio 7.0 Over Measurement Studio 6.0 Replaces the DataSocket Release License with Beta License Measurement Studio 7.0 installs the beta license for DataSocket instead of the release license. When I try to use DataSocket in Visual Basic, I receive an evaluation message and the control behaves as an evaluation control. How can this issue be corrected? URL: http://digital.ni.com/public.nsf/allkb/34ACD0B40333798E86256E3B0059F6F0

NI-DAQmxを7.0から7.1にアップグレードした際に .NETのサンプルが正常にビルドされない場合の対処法 NI-DAQmxドライバを7.0から7.1にアップグレードした際，.NET用のサンプルが正常にコンパイルできなくなりました。不具合が発生する原因と対処法を教えてください。 URL: http://digital.ni.com/public.nsf/allkb/450DB3FDD0C986CB8625701500421E03

Why Do Some Measurement Studio DAQmx .NET Examples Not Build Correctly After Upgrading NI-DAQmx 7.0 to 7.1? I updated from NI-DAQmx 7.0 to NI-DAQmx 7.1 and now some of my .NET examples do not compile correctly. Why are the examples not building correctly? How can I get them to compile properly? URL: http://digital.ni.com/public.nsf/allkb/373E5CA0143CA5F386256DB7004F004F

Order of Installation for Multiple National Instruments Hardware and Software Products I have just purchased multiple National Instruments hardware and software products. Is there a preference for the order of installation of National Instruments software and hardware? URL: http://digital.ni.com/public.nsf/allkb/779E54A45478FA2C86256D0500774FCB

Trouble Installing LabVIEW 6.0 Evaluation and Measurement Studio Demo I have been trying to install LabVIEW 6.0 Evaluation and the Measurement Studio Demo. After successfully installing the LabVIEW 6.0 Evaluation, I proceeded to install the Measurement Studio Demo. The Measurement Studio Demo aborted with an error message indicating that I needed to URL: http://digital.ni.com/public.nsf/allkb/8D7C90649FA0F7FC86256C520078D4CC