Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Installing NI Switch Executive for LabVIEW 8.5 I upgraded my LabVIEW to version 8.5 and installed NI Switch Executive 2.1.1. I’m not able to see any Switch Executive VIs in LabVIEW. Also, when I installed Switch Executive, there was no option to install LabVIEW 8.5 support. How do I install the support for Switch Executive in LabVIEW 8.5? URL: http://digital.ni.com/public.nsf/allkb/3D6BA1DB032CA23986257203004F5A98

LabVIEW 8.2에 NI Switch Executive 설치하기 LabVIEW를 8.2로 업그레이드하고 NI Switch Executive 2.1을 설치하였습니다. 하지만 LabVIEW에서 Switch Executive VI들을 찾을 수 없습니다. 게다가 Switch Executive를 설치할 때에도 LabVIEW 8.2 지원을 설정할 수 없습니다. Switch Executive가 LabVIEW 8.2를 지원하도록 하려면 어떻게 하나요 URL: http://digital.ni.com/public.nsf/allkb/B78B9259C1F8788B8625721E00299ED4

多个NI硬件和软件产品的安装顺序 我已经购买了多个NI的硬件和软件产品。有什么特定的更好的安装软硬件的顺序吗？ URL: http://digital.ni.com/public.nsf/allkb/2804461C4BEABE81482571F400211010

安裝數個NI軟硬體產品的順序 我購買了數個NI軟硬體產品。請問這些NI的軟硬體是否有優先安裝順序？ URL: http://digital.ni.com/public.nsf/allkb/30D11883DD282B45862573F0001051E3

IVI-C Class Driver Support for IVI-COM Specific Drivers How can I use IVI-C and IVI-COM specific drivers interchangeably in the same application? Can I use IVI-COM specific drivers with NI TestStand, NI Switch Executive, or the IVI Class Drivers in LabVIEW and CVI? URL: http://digital.ni.com/public.nsf/allkb/5499F9DBD07522F686256F260066BA86

Changing the Logical Name of a Switch in an NI Switch Executive Configuration I would like to change the logical name of a switch in my NI Switch Executive configuration but have been unable to figure out how to do so. If I add a switch to a NI Switch Executive configuration and subsequently change the logical name of the switch in the IVI configuration, this will URL: http://digital.ni.com/public.nsf/allkb/EA91928CD860B80886256DFD0072EA28

How Do I Deploy My Switch Executive Configuration to Target Systems? I have an application that uses Switch Executive. I have several systems already in the field, and I have just made some upgrades to both my Switch Executive Virtual Device and my IVI Configuration. How can I deploy my Switch Executive configuration to my target machines? URL: http://digital.ni.com/public.nsf/allkb/836390E0A691E1B786256DDD00780A85

Error 'invalid device' in Switch Executive Why am I getting 'invalid device' in Switch Executive when my IVI logical name exists and the device is configured correctly? URL: http://digital.ni.com/public.nsf/allkb/6AB21F3BC4BBDD7886256D7400581DD5

Order of Installation for Multiple National Instruments Hardware and Software Products I have just purchased multiple National Instruments hardware and software products. Is there a preference for the order of installation of National Instruments software and hardware? URL: http://digital.ni.com/public.nsf/allkb/779E54A45478FA2C86256D0500774FCB

What is the Purpose of the Signal Tab in the Switch Executive Routes Configuration Page I am configuring a switch in NI Switch Executive. In the Channels tab I can see the electrical attributes for each of the channels on my switch. When I go to the Routes configuration page and select the Signal tab, the attributes table is empty. What is the purpose of this table? URL: http://digital.ni.com/public.nsf/allkb/23173D537F7AAB8986256CB10065A5CE