Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Do 4-axis UMIs Work with 2-axis Motion Controllers? In the User Manual for the UMI-7764, it only says that the UMI is compatible with all 7344 controllers; it does not mention the 7342. Are they compatible? URL: http://digital.ni.com/public.nsf/allkb/142D085ED9B29235862570CF005F7981

UMI-7764などの4軸用UMI 端子台は 7342 などのような 2軸モーションコントローラ用に使用することは可能ですか？ UMI-7764 のマニュアルには 7344 で使用することが可能と記載されていますが、 7342 については記載されていません。7342 を使用することはできますか？ URL: http://digital.ni.com/public.nsf/allkb/4D8006CA27D2E97B862570D60035104A

請問4軸UMI可以支援2軸的馬達控制卡嗎? 在UMI-7764的使用手冊中，只有提到此與7344的馬達控制卡相容。請問可以使用在7342上面嗎? URL: http://digital.ni.com/public.nsf/allkb/C57C99212171A574862570D8000EB091

Following Error in a Motion Control System What is following error, and how does it affect my motion application? URL: http://digital.ni.com/public.nsf/allkb/899AE29CB4E3578B8625709D0070A725

运动控制系统中的跟踪误差（Following Error） 什么是跟踪误差（following error），这类错误会对我的运动控制系统产生什么影响？ URL: http://digital.ni.com/public.nsf/allkb/E7699C4281FDE224862573C6001F7CB6

Download Settings from MAX to the Motion Controller's FLASH Memory Is there a way to download the motion controller settings I specify in the Measurement and Automation Explorer (MAX) to the motion controller so that next time the controller power's up in the correct state? Or, What does Save Initialization Settings to FLASH motion controller URL: http://digital.ni.com/public.nsf/allkb/9F7B09E3CBA2A25D86256FFE0047E25E

Transferring Settings from MAX to Motion Controller's Flash Memory Is there a way to transfer the motion controller settings I specify in Measurement and Automation Explorer (MAX) to its onboard flash so that next time it is powered up, it comes up in that particular state? Or, what does the option Save Initialization Settings as Controller URL: http://digital.ni.com/public.nsf/allkb/B99049E245913526862574160077B17E

Using SCB-68 to Access the Digital I/O Lines of a 73xx Motion Controller I have a PCI/PXI 73xx motion controller. Can I access the digital I/O lines of this controller using a general purpose breakout box like the SCB-68? URL: http://digital.ni.com/public.nsf/allkb/68BE5D9959E42FC986256FFE004AAFF4

下载MAX中的设置到运动控制器的快擦型存储器（FLASH Memory） 有没有一种方法把在MAX中我指定的运动控制器的配置下载到电机控制器上，那么下次当电机上电后进入正确的状态？在MAX中的Save Initialization Settings to FLASH是做什么的？ URL: http://digital.ni.com/public.nsf/allkb/CFA19EC06302F69F8625702C00302776

How does Feedback Work with Closed Loop Contour Moves? I am using an NI-Motion controller in Closed Loop Stepper Mode. How is feedback handled when I perform a contour move? URL: http://digital.ni.com/public.nsf/allkb/06B43DC74099D56B86256FBA006F3C29