Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

How Can I Reset the External Calibration Password for My 783x Board? I am following the NI 783xR Calibration Procedure for NI-RIO and when I get to the adjustment procedure and use the 783XR Calibration - Initialize External Calibration VI, I get the error: Error -2000 occurred at URL: http://digital.ni.com/public.nsf/allkb/8DB02D009C3C38088625737100744FA1

¿Cómo Reiniciar un Controlador CompactRIO Programáticamente? Me gustaría poder reiniciar programáticamente mi controlador CompactRIO. ¿Es posible? URL: http://digital.ni.com/public.nsf/allkb/80324C6DDAEC98D1862572A3006344AF

Why is the digital line on my PXI-7833 have low impedance when I use it as an input? I am using a PXI-7833 and use the same digital line for output and input. In the documentation it says that as an input the digital lines are high impedance. Why do I see low impedance on mine? URL: http://digital.ni.com/public.nsf/allkb/06D1FC6B574024C986257253005D8E92

我如何同步我的 R-系列智能 I/O 板卡上的 FPGA 时钟到 PXI 时钟？ 我想要同步我的 R-系列 PXI 板卡的 FPGA 时钟到 PXI 背板的 10MHz 时钟。在哪里进行这个设置？ URL: http://digital.ni.com/public.nsf/allkb/025D291DB28A5E0B48257193002E5957

Compatibility of Digital I/O lines on the 78xx R series FPGA RIO Boards Are the digital lines on 78xx series RIO FPGA devices compatible with CMOS and/or TTL logic? URL: http://digital.ni.com/public.nsf/allkb/9B696F0E345E01A5862571870055634E

我如何才能利用编程的方式重新启动我的CompactRIO控制器？ 我需要利用编程的方式重新启动我的CompactRIO控制器。这是否可能？ URL: http://digital.ni.com/public.nsf/allkb/E30AEFBF6D44A72A4825715A00215BD8

How Do I Synchronize the FPGA Clock in my R-Series Intelligent I/O Board to my PXI clock? I would like to synchronize the FPGA clock of my R-series PXI board to the 10 MHz clock in the PXI backplane. Where can I select this setting? URL: http://digital.ni.com/public.nsf/allkb/53306F0FDA486B298625738A007B130F

How Do I Synchronize the FPGA Clock in my R-Series Intelligent I/O Board to my PXI clock? I would like to synchronize the FPGA clock of my R-series PXI board to the 10 MHz clock in the PXI backplane. Where can I make this setting? URL: http://digital.ni.com/public.nsf/allkb/D108D4AF937524CA862570FF004C2A48

R系列Intelligent I/O Board的FPGA Clock要如何和PXI clock作同步的動作？ 我想將R系列PXI卡片上的FPGA clock和PXI背板的10 MHz clock作同步的動作。有相關的選項可以完成這樣的設定嗎？ URL: http://digital.ni.com/public.nsf/allkb/52138E285066FA8D86257405000C8234

How to Reconnect to the LabVIEW FPGA Compile Server I disconnected my compiler client from the compile server and when I tried to reconnect to the FPGA VI by hitting Build in FPGA Project Manager it will recompile again. How can I reconnect to the server without compiling the VI again? URL: http://digital.ni.com/public.nsf/allkb/417E4AE5B5C74BEE862570BB00087933