Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

What is the Difference Between a Soft Reboot and a Hard Reboot on a Real-Time FieldPoint Controller? What is the difference between a soft reboot and a hard reboot on a real-time FieldPoint controller? URL: http://digital.ni.com/public.nsf/allkb/C268F401137B3D14862573A600771CB4

FieldPoint Status LED Error Indicators My FieldPoint status LED remains lit or is flashing a certain number of times. What does this mean? URL: http://digital.ni.com/public.nsf/allkb/29283D88B7774B22862573440058480F

Indicadores de Error por el LED de Status del FieldPoint El LED de status de mi FieldPoint permanece encendido o está parpadeando un número de veces. ¿Qué significa esto? URL: http://digital.ni.com/public.nsf/allkb/7894E058C8CD7013862574610075788E

Recovering a FieldPoint Configuration from the IAK File My FieldPoint system has lost its configuration, but I have a copy of the IAK file on my PC. Can I use this to recover my FieldPoint's configuration? URL: http://digital.ni.com/public.nsf/allkb/2EF82CA062692F4886257325008067BC

In MAX, How Can I Link my [c]FP to a New IP Address? I have configured a compact FieldPoint system on my local subnet with plans to move it to another subnet. I save the Measurement & Automation Explorer (MAX) IAK file and import it on a computer on the new subnet with the [c]FP system. However, MAX now shows the system configuration on the URL: http://digital.ni.com/public.nsf/allkb/EED81C50334B8023862572E4004DC06F

In Measurement & Automation Explorer (MAX), how can I relink my [compact]FieldPoint system to a newer IP address? I have configured a [compact]FieldPoint system on my local subnet with plans to move it to another subnet. I save the MAX IAK file and import it on a computer on the new subnet with the [compact]FieldPoint system. However, MAX now shows the system configuration on the new subnet and an URL: http://digital.ni.com/public.nsf/allkb/B021C0871E628928862572E4004DCE82

Can the cFP-DO-401 Generate Square Wave Pulses? I have a cFP-2000 controller and a cFP-DO-401 module. Can I output square waves with the cFP-DO-401 module of a given frequency? URL: http://digital.ni.com/public.nsf/allkb/6AE03CAC3EAF14BE8625727C005697C4

What Background Communications Occur Between a Host PC and a [c]FieldPoint Controller? Are there any background communications that occur between a FieldPoint Controller and host PC apart from what a user programs? URL: http://digital.ni.com/public.nsf/allkb/CB1F3CD7923FBF0A86257267007413A9

What Background Communications Occur Between a Host PC and a [c]FieldPoint Controller? Are there any background communications that occur between a FieldPoint Controller and host PC apart from what a user programs? URL: http://digital.ni.com/public.nsf/allkb/7A4D47057B76AD79862572670074173E

Why did I measure incorrect PWM signal from my [c]FP-PWM-520's Vout? I write 0.5 to the channels of my [c]FP-PWM-520 in Measurement & Automation Explorer (MAX) and the return status of the write operation is 'Success'. However when I measure the output with an oscilloscope I see a large DC component added to my output signal. Why is this? URL: http://digital.ni.com/public.nsf/allkb/E727EEFA438E41C786257264004042F2