Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Migrating VBAI 2.6.1 Script to LabVIEW Generates VI that Will Not Execute Properly I have Vision Builder for Automated Inspection (VBAI) version 2.6.1 and I have LabVIEW 7.0 and Vision 7.1. I have created a VBAI inspection and now I would like to generate LabVIEW code from my inspection. The code migration completes without any errors or warnings, but when I open up the URL: http://digital.ni.com/public.nsf/allkb/EDF96133CB1D3B6F862570FA004F3BD0

VBAI 2.6.1 스크립트를 LabVIEW로 코드변환한 VI가 적절하게 실행되지 않습니다. 저는 Vision Builder for Automated Inspection (VBAI) version 2.6.1과 LabVIEW 7.0 and Vision 7.1을 가지고 있습니다. VBAI 검사를 생성하고, 제 검사를 LabVIEW코드로 생성하고 싶습니다. 이 코드변환은 어떤 에러나 경고없이 완료됐으나, 제가 생성된 VI를 열었을때, 그 VI는 제 검사를 적절하 URL: http://digital.ni.com/public.nsf/allkb/B62A2EF59B522E6686257142001E34F1

將 VBAI 2.6.1 程式轉換為 LabVIEW 程式時，VI 無法正確執行。 我安裝了 Vision Builder for Automated Inspection (VBAI) 2.6.1，LabVIEW 7.0 以及 Vision 7.1。我已建立一個 VBAI 的檢測程式並而想要由此程式產生出 LabVIEW 的程式碼。程式轉換過程中沒有任何的警告或錯誤訊息，但是當我打開轉換完成的 LabVIEW VI 時，這個VI卻無法正確執行。我■> URL: http://digital.ni.com/public.nsf/allkb/BEE615A089CFBE708625727400473A05

How Do I Configure Product Selection using DAQmx in VBAI? What steps must I take to set up Vision Builder for Automated Inspection (VBAI) for product selection based on DAQmx digital input? URL: http://digital.ni.com/public.nsf/allkb/33364C17A30E3268862570890079DBD6

在VBAI底下無法建立LabVIEW程式碼 在VBAI 2.0底下無法建立LabVIEW 7.1的程式碼，出現警示訊息要求我安裝NI-Vision，安裝過後仍出現同樣的訊息。目前使用的Vision Development Module版本為6.1。 URL: http://digital.ni.com/public.nsf/allkb/0B63F918415238E286257089002578BB

NI-IMAQ Installer FAQ What are the frequently asked questions regarding the installation of the NI-IMAQ drivers? URL: http://digital.ni.com/public.nsf/allkb/58F6F43A3984BFAC86256FE2004E0A84

NI-IMAQ Installer FAQ What are the frequently asked questions regarding the installation of the NI-IMAQ drivers? URL: http://digital.ni.com/public.nsf/allkb/452BCA17FBC2A03E86257115005AE997

NI-IMAQ Installer FAQ What are the frequently asked questions regarding the installation of the NI-IMAQ drivers? URL: http://digital.ni.com/public.nsf/allkb/D994459648BC4E6586257115005AF080

Targeting VBAI to Real-Time Environments I'd like to be able to target Vision Builder for Automated Inspection to my PXI RT chassis, acquire images using a firewire camera connected to a PXI-8252 in that chassis, and then run an inspection on those images. Is this possible? URL: http://digital.ni.com/public.nsf/allkb/1179AB5950603C4786256FAD0004DB8A

Vision Builder for Automated Inspection Installer FAQ What are some of the frequently asked questions regarding the installation of Vision Builder for Automated Inspection (VBAI)? URL: http://digital.ni.com/public.nsf/allkb/A7C34BAA9669039E8625722D00761139